This guide separates what has been notified from what is only being talked about, whether you search for PM Surya Ghar Yojana 2.0 or PM Surya Ghar Muft Bijli Yojana 2.0. It covers the current subsidy, eligibility, the 2026 rule changes, and whether to wait.

What Is PM Surya Ghar 2.0?

PM Surya Ghar 2.0 (also searched as PM Surya Ghar Yojana 2.0 or PM Surya Ghar Muft Bijli Yojana 2.0) is an informal label. It describes the possible next phase of India’s residential rooftop solar programme. It is not an official scheme name. Here is how that label came about, and how much of it is confirmed.

Where Things Stand Today

PM Surya Ghar 2.0 has not been officially launched. The original scheme began in February 2024 with an outlay of ₹75,021 crore, and it is meant to run until the end of the financial year (FY) 2026-27, as MNRE’s scheme guidelines and Press Information Bureau (PIB) material describe. Today the solar subsidy in India depends on installed capacity alone; batteries get no subsidy of their own, and apartment residents largely sit outside the scheme. The 2.0 talk began after MNRE reportedly held a brainstorming session on 23 July 2026 on the next roadmap. Trade media said a discussion document would follow, but nothing has been notified since, so treat every 2.0 detail as a proposal.

What Could PM Surya Ghar 2.0 Change?

The ideas reported so far fall into a few buckets. None of them is policy yet.

If you want proof that storage is already on MNRE’s radar, look at the scheme’s “Innovative Projects” component. It earmarks ₹500 crore for pilots such as rooftop solar with battery storage and electric vehicles, funding up to 60% of project cost or ₹30 crore, whichever is lower (All India Radio). That is a pilot window for startups and institutions, not a household subsidy.

PM Surya Ghar 2.0 Subsidy: What You Can Count On Today

People search “PM Surya Ghar 2.0 subsidy” hoping for a new number. There isn’t one. The numbers below apply to the current scheme and are in effect now.

Subsidy for Individual Homes

The central financial assistance (CFA) is calculated per kilowatt (kW) and capped at 3 kW, as listed on state government scheme pages and the national portal.

So a 5 kW system gets the same central subsidy as a 3 kW one. The subsidy is credited by Direct Benefit Transfer (DBT) to your bank account through the portal.

Subsidy for Housing Societies

Group Housing Societies (GHS) and Resident Welfare Associations (RWA) get ₹18,000 per kW for common facilities, including EV charging, up to 500 kW (calculated at 3 kW per house), as per official scheme listings.

Will Your Subsidy Change Under 2.0?

There’s no way to say yet. A generation-linked model could mean some of the support arrives over time instead of in one payment, but that is speculation until MNRE publishes a draft. Any state top-up is separate. States can add to the central amount; for example, Gujarat has newly reported support for systems up to 2.18 kWp from 22 October 2026, so always check your state nodal agency, too.

PM Surya Ghar Yojana 2.0 Eligibility: Who Can Apply?

No separate eligibility list exists for 2.0. What you can apply under today is the existing scheme, so here is who it covers and what the proposals might widen.

Eligibility Under the Current Scheme

According to MNRE’s reply in the Lok Sabha on 29 July 2026, all residential consumers with a grid-connected electricity connection from their local distribution company (DISCOM) can apply on the National Portal for PM Surya Ghar Muft Bijli Yojana. In practice, you will need:

• A residential electricity connection in your name
• A rooftop with enough shadow-free space
• A system installed by a vendor registered on the portal
• Equipment that meets the scheme’s domestic content rules

Commercial and industrial buildings are not covered by the residential subsidy.

Could Eligibility Expand Under 2.0?

Possibly. Apartment residents and renters without their own roof are the obvious gap, which is why shared solar keeps coming up in the reports. Until MNRE says so officially, don’t assume you qualify through a route that doesn’t exist yet.

What Has Changed in PM Surya Ghar Rules in 2026?

While 2.0 stays a proposal, the existing scheme has been tightened and simplified. These are the changes that matter to a homeowner.

Easier Approvals and Cheaper Loans

MNRE’s Lok Sabha reply lists the measures taken to speed things up:

• Collateral-free loans from nationalised banks at repo rate plus 50 basis points (5.75% a year at present) for 10 years
• Technical feasibility requirement waived, with auto load enhancement up to 10 kW
• Net metering agreement built into the portal application, so no separate paperwork
• A grievance helpline, 15555, running in 12 languages

Equipment and Quality Rules

Domestic content matters. Under the Approved List of Models and Manufacturers (ALMM) List-II, solar cells must be on the approved list for projects commissioned after 1 June 2026, as industry guides report. MNRE has also set a 15-day window for vendors to fix defects flagged in third-party inspections. In plain words, a poor installation can delay your subsidy.

Progress and Deadline

As of 27 July 2026, MNRE reported 40,45,298 systems installed, 48,80,796 households benefited, and ₹27,343.9 crore released as CFA. The official timeline still runs to FY 2026-27. Reports of an extension exist, but we found no notification.

Should You Wait for PM Surya Ghar 2.0?

For most households, no. The scheme you can use is open, funded, and paying out. Waiting means paying higher electricity bills each month for a scheme with no date. A few things worth weighing:

• Timeline risk: The current scheme is approved only till FY 2026-27, and the subsidy is released after inspection, not at application.
• Battery plans: If you want storage, you can add a battery privately today, though it is not subsidised under the current scheme.
• Apartment dwellers: You may be better off watching for official shared-solar rules, or checking whether your society can apply as a GHS or RWA.

The Bottom Line: Start With the Scheme That’s Live

PM Surya Ghar 2.0 is, for now, a reported idea with no notification, no subsidy amount, and no launch date. The scheme that pays today is the existing one: up to ₹ 78,000 in central subsidy, collateral-free loans, simpler approvals, and a fixed window that runs to 31 March 2027. Generation-linked incentives, battery support and shared solar may arrive later. Until MNRE notifies them, waiting only means paying full electricity bills while a working scheme sits unused.

So go for the current scheme, which has already benefited so many Indian households. Shree Rudra Power Systems can size a system around your actual electricity bill, guide you through the PM Surya Ghar application, and install it, so nothing holds up your subsidy. If the 2.0 changes do arrive, you will already be generating. Get your free solar quote from Shree Rudra Power Systems, book your free solar consultation now.

Frequently Asked Questions

Is PM Surya Ghar 2.0 launched?

No. As of 25 October 2026, we found no scheme, guideline, or portal called PM Surya Ghar 2.0 notified by MNRE. What exists is media reporting that the ministry discussed a redesign in July 2026. The live scheme is still the original PM Surya Ghar: Muft Bijli Yojana, and you can apply under it on the National Portal. Check the portal and MNRE’s website for any official change.

What is the subsidy under PM Surya Ghar 2.0?

No amount has been announced, so any 2.0 figure you see online is unofficial. The central subsidy today is ₹30,000 for 1 kW, ₹60,000 for 2 kW, and ₹78,000 for 3 kW or more, paid by DBT to your bank account. Reports suggest part of future support could depend on actual generation, but that is only a proposal.

Is PM Surya Ghar Yojana 2.0 the same as PM Surya Ghar Muft Bijli Yojana 2.0?

Yes. PM Surya Ghar Yojana 2.0, PM Surya Ghar Muft Bijli Yojana 2.0, and PM Surya Ghar 2.0 all refer to the same thing: the talked-about next phase of the existing scheme. The official name remains Pradhan Mantri Surya Ghar: Muft Bijli Yojana, and “2.0” is not a formal title. Whichever spelling you search, the live scheme is the same one.

Will batteries get a subsidy under PM Surya Ghar 2.0?

Not confirmed. Battery storage is reportedly one of the ideas under discussion, but no subsidy has been notified, and the current residential subsidy has no dedicated battery component. You can add a battery privately, though its cost would not be covered. MNRE’s Innovative Projects component does fund battery pilots, but that is meant for startups and institutions, not households.

What is the last date for PM Surya Ghar?

The scheme is approved till the end of FY 2026-27, i.e., 31 March 2027. Reports mention a possible extension, but we found no notification. Industry guides note the subsidy is released after inspection and commissioning, not at application, so applying late can still miss the window. Aim to finish installation well before March 2027.

Should I wait for PM Surya Ghar 2.0 before installing solar?

No. 2.0 has no launch date, no notified benefit, and no confirmed rules, while the current subsidy of up to ₹78,000 is available now. Waiting also means paying full electricity bills in the meantime, and the existing scheme is approved only till March 2027. If battery or apartment support matters to you, watch the portal for official notices rather than pausing your plan.

The post PM Surya Ghar 2.0 in 2026: Latest Subsidy, Eligibility, Rules & What Has Changed appeared first on Rooftop Solar for your home and more | Shree Rudra Power Systems.

Sounds simple, until you start searching. One site says Odisha gives no state support, another promises the full ₹1.38 lakh, and a few still quote last year’s prices. If you live in Bhubaneswar, Cuttack, Berhampur, or Sambalpur and just want a straight answer before spending lakhs on a system, that gets frustrating fast.

So here is the straight answer. This guide shows what the solar subsidy in Odisha is worth for 1 kW, 2 kW, and 3 kW systems, who is eligible, which documents you need, how the application works step by step, and how long the money really takes to arrive.

Odisha Solar Subsidy 2026 at a Glance

Here’s the short version before we get into the details. Skim this table, then read on for the fine print that decides whether you actually receive the money.

What Is the Odisha Solar Subsidy?

There isn’t one single “Odisha subsidy”. What households call the solar subsidy in Odisha is really two layers of financial support stacked together: a central one from the Government of India and a top-up from the state. This section explains each layer so you know where the money comes from.

Central Subsidy Under PM Surya Ghar

Launched with an outlay of ₹75,021 crore, PM Surya Ghar aims to put rooftop solar on one crore homes by financial year 2026-27. The money you receive is called Central Financial Assistance (CFA). It is a fixed amount linked to your system size, not a percentage of what you pay your installer. Applications and tracking all happen on the official PM Surya Ghar portal, and the scheme rules sit with MNRE.

Odisha Govt Solar Subsidy (State Top-Up)

Odisha added its own support on top of the central amount. The state set aside ₹495 crore for this top-up in its financial year 2026-27 budget, routed through the Odisha Akshaya Shakti Bikash Yojana (OASBY).

A quick word of caution. Some national websites still say Odisha offers no additional state subsidy. Those pages were last updated in late 2025 and haven’t caught up. For the latest position, check with the Odisha Renewable Energy Development Agency (OREDA), which is the state nodal agency for rooftop solar.

How Much Is the Rooftop Solar Subsidy in Odisha?

This section lays out the exact amounts by system size, shows what happens above 3 kW, how this might affect 1kw solar panel price in Odisha with subsidy, and gives you a simple way to work out your own number.

Subsidy by System Size

The state’s slab works out as ₹25,000 for the first kW, ₹25,000 for the second, and ₹10,000 for the third. That is why the 3 kW figure is ₹60,000 and not ₹75,000.

What If You Install More Than 3 kW?

You can install a system above 3kW. The subsidy simply stops growing. The central amount is capped at ₹78,000, and the state top-up tops out at ₹60,000, so a 3kW solar panel price in Odisha with subsidy has the same deductions as a 5 kW system would have. Bigger systems still make sense if your consumption is high, but plan for the extra cost to come out of your own pocket.

Odisha Solar Subsidy Calculator: Work It Out Yourself

You don’t need a fancy tool. Use this three-step method, or run the same numbers on the portal’s own calculator.

1. Pick your rooftop solar system size (1 kW, 2 kW, or 3 kW and above).
2. Add the central and state amounts from the table above.
3. Subtract the total from your installer’s quote. What’s left is your net cost.

Who Is Eligible for the Solar Panel Subsidy in Odisha?

Not everyone who installs solar gets the subsidy, so it pays to check the rules first. The following are the eligibility requirements for the solar panel subsidy in Odisha:

• You are a residential consumer with a valid electricity connection from an Odisha distribution company (DISCOM).
• You have a suitable, shadow-free roof that you own or have the right to use.
• You install a grid-connected rooftop system.
• Your installer is empanelled on the national portal.
• Your panels and inverter meet the approved list and BIS (Bureau of Indian Standards) requirements.
• You haven’t already claimed a rooftop solar subsidy for the same connection.

The four DISCOMs in Odisha are TPCODL (Tata Power Central Odisha Distribution Limited), TPNODL (Tata Power Northern Odisha Distribution Limited), TPSODL (Tata Power Southern Odisha Distribution Limited), and TPWODL (Tata Power Western Odisha Distribution Limited). Which one you deal with depends on your district.

Documents Required for the Odisha Solar Subsidy

Missing paperwork is one of the most common reasons applications stall. Keep these ready before you register, and the process moves much faster.

• Recent electricity bill (it carries your consumer number)
• Aadhaar card
• Proof of ownership or right to use the roof
• Bank account details with a cancelled cheque (the account should be in your name)
• Passport-size photograph
• Photo of the proposed rooftop space

Make sure the name on your electricity bill matches your Aadhaar and bank account. A simple mismatch can hold up the subsidy payment.

Odisha Solar Subsidy Process: Step by Step

The application runs online, but several steps depend on your DISCOM and installer. This section walks through the journey in order, so you know what happens next at every stage.

Step 1: Register on the National Portal

Go to pmsuryaghar.gov.in, choose Odisha as your state, pick your DISCOM, and enter your consumer number. Register before you talk to any installer so the application is in your name from day one.

Step 2: Apply for Rooftop Solar

Log in with your consumer number and mobile number, then submit the rooftop solar application. Pick the system capacity based on your bills and the roof space you have.

Step 3: Wait for DISCOM Feasibility Approval

Your DISCOM checks whether your connection can take the system. Reports from installers suggest this stage commonly takes a couple of weeks, though it varies. According to the information published for Odisha, a separate technical feasibility study isn’t required for systems up to 10 kW.

Step 4: Choose an Empanelled Vendor

Pick an installer from the portal’s state-wise vendor list. Check the empanelment on the portal itself, not just on a brochure. Compare at least two or three quotes on panel brand, inverter, warranty, and after-sales support.

Step 5: Installation

The vendor surveys your roof, designs the system, and installs it. The physical installation of a home system often takes only a day or a few days. Scheduling and materials are usually what take longer.

Step 6: Net Meter Installation and Inspection

Your DISCOM installs a net meter, which records both what you draw from the grid and what you send back. It then inspects the system and issues a commissioning report. This is the step where delays most often creep in.

Step 7: Submit Bank Details

Once the system is commissioned, upload your bank details and a cancelled cheque on the portal.

Step 8: Receive the Subsidy

The central subsidy is credited to your bank account through Direct Benefit Transfer (DBT). Ask your installer or OREDA how the Odisha state top-up is claimed and credited against your application, as the procedure can differ from the central payment.

How Long Does the Odisha Solar Subsidy Take?

This is the question people care about most, and the honest answer is “it depends on the queue”. Below is a realistic picture based on the scheme’s stated process and what installers report. This section also explains why some applications take longer than others.

Why Do Some Applications Get Delayed?

The following are some of the reasons why your STSE subsidy of PM Surya Ghar Muft Bijli Yojana application gets rejected or delayed:

• Name or consumer number mismatch between documents
• Bank account not linked or not in the applicant’s name
• Net meter queues at the DISCOM
• Non-compliant equipment or a non-empanelled installer
• Incomplete commissioning report upload

Net Metering in Odisha

Net metering is what turns your rooftop plant from a power source into a money saver. This section explains how it works and what the rules allow.

With net metering, any extra electricity your panels produce during the day goes back to the grid. Your DISCOM credits those units against your consumption, so your bill falls. Odisha’s net metering framework, set under the Odisha Electricity Regulatory Commission (OERC), covers systems from 1 kWp to 500 kWp. Your DISCOM handles the meter installation and inspection.

Financing: Loans for Rooftop Solar

Because the subsidy comes after installation, you’ll need to pay upfront or borrow. This section covers the solar loan option under the scheme.

PM Surya Ghar is paired with collateral-free loans for residential rooftop solar, offered through public sector banks. For example, the State Bank of India (SBI) Surya Ghar loan is available for eligible applicants. Check the loan limit, interest rate, and repayment terms directly with the bank, since they can change. If you choose an Equated Monthly Instalment (EMI) route through an installer, compare the total cost with a bank loan.

Common Mistakes to Avoid

Most subsidy problems are avoidable. Keep this short checklist handy.

• Paying an installer before registering on the portal
• Picking a vendor only on price, without checking empanelment
• Ignoring shading on the roof
• Not asking for ALMM (Approved List of Models and Manufacturers) compliance proof in writing
• Assuming a bigger system means a bigger subsidy
• Skipping the DISCOM approval and net meter steps

Is Rooftop Solar Worth It in Odisha?

For most households with steady daytime usage, yes. Your payback depends on three things: your net cost after subsidy, your monthly units consumed, and your DISCOM tariff. Divide your net cost by your yearly bill savings to get a rough payback period. After that, you’re effectively generating free electricity for the rest of the system’s life. Panels typically carry long performance warranties, so ask for the details in writing.

The subsidy is generous, but the process has a lot of moving parts: portal registration, DISCOM approvals, compliant equipment, net metering, and paperwork. Shree Rudra Power Systems is a residential rooftop solar company that looks after the journey end to end, from system design and installation to financing support and after-sales service.

Frequently Asked Questions

How much solar subsidy is available in Odisha in 2026?

Eligible residential consumers can get up to ₹ 78,000 from the central government and up to ₹60,000 from the Odisha government, which adds up to ₹1,38,000 for a 3 kW system.

Does Odisha give a state subsidy on top of PM Surya Ghar?

Yes. Odisha provides additional state support of ₹25,000 for 1 kW, ₹50,000 for 2 kW, and up to ₹60,000 for 3 kW and above, on top of the central subsidy. Confirm the current terms with OREDA.

What is the subsidy for 1 kW, 2 kW, and 3 kW solar in Odisha?

The combined subsidy is ₹55,000 for 1 kW, ₹1,10,000 for 2 kW, and ₹1,38,000 for 3 kW. You can use the following table as the solar subsidy in Odisha calculator:

How do I apply for the rooftop solar subsidy in Odisha?

Register on pmsuryaghar.gov.in with your consumer number, apply for rooftop solar, get DISCOM approval, choose an empanelled vendor, complete installation and net metering, then submit your bank details.

Is the subsidy paid before or after installation?

The solar subsidy is paid after your rooftop solar system has been installed and commissioned. You pay the installer first, and the subsidy is credited to your bank account once the system is commissioned and verified.

How long does it take to receive the Odisha solar subsidy?

The central subsidy is stated to be credited within about 30 days of the commissioning report. End to end, many households see roughly 6 to 12 weeks, depending on DISCOM approvals and net meter installation.

Can I get a subsidy for a 5 kW system?

You can install 5 kW, but the central subsidy stays capped at ₹78,000 and the state top-up at ₹60,000, so the subsidy is the same as for 3 kW.

Is the subsidy available for commercial or industrial buildings?

The PM Surya Ghar subsidy is meant for residential consumers. Commercial and industrial users follow different policies.

The post Odisha Solar Subsidy 2026: Full Process, Eligibility & Timeline Explained appeared first on Rooftop Solar for your home and more | Shree Rudra Power Systems.

On 22 October 2026, the Gujarat government introduced an additional state subsidy for eligible residential rooftop solar systems of up to 2.18 kWp. For these systems, general-category households bear 10% of the government’s eligible system cost after the central subsidy. In comparison, Scheduled Caste (SC) and Scheduled Tribe (ST) households bear 5%. The Gujarat government covers the remaining eligible amount.

The final solar panel price in Gujarat still varies by system size, city, equipment, roof conditions, and installation requirements.

In this guide, we will break down the cost of installing rooftop solar in Gujarat with and without subsidy, explain how both subsidies work, and cover eligibility, documents, and the application process.

Solar Subsidy in Gujarat in 2026: How Much Do You Get?

Residential households in Gujarat can now receive two subsidies for installing a rooftop solar system:

1. Central Financial Assistance (CFA) under the PM Surya Ghar Muft Bijli Yojana
2. The new Gujarat state subsidy for eligible systems up to 2.18 kWp, introduced on 22 October 2026.

Systems above 2.18 kWp can still receive the applicable central subsidy, but they do not qualify for the additional Gujarat state subsidy.

Let’s explore how much assistance state and central subsidies offer homeowners for installing on-grid rooftop solar systems in Gujarat.

Central Financial Assistance Under PM Surya Ghar

The CFA under the PM Surya Ghar Muft Bijli Yojana is capped at ₹ 78,000 for systems of 3 kW or higher capacity. Here’s a tiered breakdown of the financial assistance:

Additional Gujarat State Subsidy From 22 October 2026

From 22 October 2026, eligible residential households in Gujarat can receive an additional state subsidy for rooftop solar systems of up to 2.18 kWp. This support is in addition to the Central Financial Assistance available under the PM Surya Ghar Muft Bijli Yojana.

The Gujarat government calculates this subsidy using a benchmark system cost, as explained below.

• For the first 2 kWp, this benchmark is ₹50,000 per kWp. This means the government considers a 1 kWp system at ₹50,000 and a 2 kWp system at ₹1,00,000 for subsidy calculation purposes.
• This benchmark is not the same as the actual price quoted by a solar installer. Your installation may cost more or less depending on the panels, inverter, mounting structure, roof conditions, city, and other project requirements.

For eligible systems, a general-category household has to bear 10% of this benchmark cost, while a Scheduled Caste (SC) or Scheduled Tribe (ST) household bears 5%. The applicable central subsidy is deducted from the benchmark cost, and the Gujarat government provides the remaining amount as the state subsidy.

For example, for a 2 kWp system, the benchmark cost is ₹1,00,000. The central CFA is ₹60,000. A general-category household’s 10% share is ~₹10,000. Per this formula, the remaining ₹30,000 is covered by the Gujarat state subsidy.

There is also an important capacity limit. If the installed rooftop solar capacity exceeds 2.18 kWp, the Gujarat state subsidy does not apply. Such solar systems can still receive the applicable central CFA under PM Surya Ghar, subject to the scheme’s rules.

Here is what the combined subsidy in Gujarat looks like for some common eligible system sizes:

Please note: These figures are calculated using the benchmark cost and subsidy formula specified in the Gujarat government resolution dated 22 October 2026. The benchmark cost is used only to calculate the subsidy. Your actual rooftop solar price may be different depending on the equipment, installer, roof conditions, and other installation requirements.

Solar Panel Price List in Gujarat With and Without a Subsidy

Now that you have a clear subsidy breakdown, let’s start with the solar rooftop price list for general category households in different cities in Gujarat.

Solar Panel Price in Ahmedabad

The table below shows the prices of solar in Ahmedabad for general-category households. For a 2 kW system, the subsidized price includes both the applicable central CFA and the new Gujarat state subsidy. Systems above 2.18 kWp receive only the applicable central CFA.

*Please note prices are subject to change: The above-mentioned solar panel price in Gujarat is indicative as of 01 October 2026 for the Shree Rudra Power Systems Blue 6ft variant. The final cost of solar panel installation in Gujarat depends on your DISCOM (Distribution Company) charges, product variant opted for, panel type, inverter type, mounting structure height, type of after-sales service, savings guarantee, roof height, etc.

Solar Panel Price in Surat

The table below shows the prices of rooftop solar in Surat for general-category households. For a 2 kW solar system, both the central and Gujarat subsidies apply. Larger systems can still get the central subsidy, but the Gujarat subsidy stops once the capacity goes above 2.18 kWp.

*Please note prices are subject to change: The above-mentioned solar panel price in Gujarat is indicative as of 03 October 2026 for the Shree Rudra Power Systems Blue 6ft variant. The final cost of solar panel installation in Gujarat depends on your DISCOM charges, product variant opted for, panel type, inverter type, mounting structure height, type of after-sales service, savings guarantee, roof height, etc.

What Decides the Solar Panel Price in Gujarat?

Two homes in the same city can get different quotes. These are the factors that move the price:

• System size: A bigger system costs more in total, but the cost per kW usually drops a little as capacity goes up.
• Panel type and brand: Made-in-India DCR (Domestic Content Requirement) panels are mandatory for the subsidy. Cells must also meet ALMM (Approved List of Models and Manufacturers) List-II norms for projects commissioned after 1 June 2026.
• Inverter and mounting structure: Brand, warranty, and structure height all change the quote.
• After-sales service and savings guarantee: The cheapest quote often leaves these out.
• Roof and DISCOM: roof height, shadow-free area, and DISCOM charges differ by location.

Who Is Eligible for the Solar Panel Subsidy in Gujarat?

To avail a subsidy on solar installation, you must meet the following eligibility criteria:

• You must be an Indian citizen
• You must own a home with a roof that is suitable for solar
• You should have a valid residential electricity connection
• You must choose Made-in-India DCR solar panels
• You must not have taken any other subsidy for solar panels earlier
• You must install through an MNRE (Ministry of New and Renewable Energy)-approved registered vendor on the PM Surya Ghar portal

If you tick all the boxes, congratulations! You’re eligible to receive a subsidy. Commercial and industrial rooftop solar connections are not covered by this scheme.

Documents Required for Solar Subsidy in Gujarat

Here’s a list of documents that you’ll need to avail a solar subsidy in Gujarat:

• Aadhaar card (or PAN) as proof of identity
• Latest electricity bill with your consumer number
• Proof of ownership, such as property papers or tax receipt
• Cancelled cheque and bank account details for the subsidy transfer
• A mobile number and email ID for portal registration

How to Apply for a Subsidy? Step-by-step Guidance

Here’s a step-by-step walkthrough of how you can apply for a solar subsidy in Gujarat:

• Portal Access: Visit the National Portal for Rooftop Solar (pmsuryaghar.gov.in) and click ‘Apply for Rooftop Solar’.
• Register Your Account: Select your state, district, and DISCOM. Then, enter your ‘Customer Account Number’, mobile number, and email.
• Apply for Rooftop Solar: Log in and fill in your personal details and electricity bill information. Upload your ID, ownership proof, and latest bill.
• Get DISCOM Feasibility Approval: Your DISCOM checks feasibility and approves the application.
• Choose an Approved Vendor: Select a DISCOM‑approved solar vendor like Shree Rudra Power Systems to install rooftop solar at your home.
• Net Meter Installation: Once installation is complete, your DISCOM will fit a bi‑directional net‑meter to track imported and exported units.
• Obtain Commissioning Certificate: Your DISCOM issues a Solar Commissioning Certificate confirming the system is live.
• Submit Bank Details and Claim Subsidy: Log back into the portal, submit the Commissioning Certificate, enter your bank details, and upload a cancelled cheque.
• Receive Subsidy: The approved central subsidy amount is transferred to your bank account within 30-45 days of claim approval.

Gujarat DISCOMs You Will Deal With

Your DISCOM depends on where you live: UGVCL (North Gujarat), DGVCL (South Gujarat), MGVCL (Central Gujarat), PGVCL (Saurashtra and Kutch), or Torrent Power in Ahmedabad, Gandhinagar, and Surat. Pick the right one when you register on the portal.

Tips to Avoid Subsidy Delays

There can be multiple PM Surya Ghar Muft Bijli Yojana application rejection reasons. Here are a few of them:

• Apply on the portal before installation, not after.
• Make sure the name on the bill, ownership proof, and bank account match.
• Use Made-in-India DCR panels from a registered vendor.
• Keep your commissioning certificate and net meter details handy for the claim.

Conclusion

Installing a rooftop solar system has become more affordable for eligible households in Gujarat with the addition of the new state subsidy from 22 October 2026. For systems up to 2.18 kWp, eligible households can receive the Central Financial Assistance (CFA) under the PM Surya Ghar scheme along with additional support from the Gujarat government. Systems above 2.18 kWp do not receive the state subsidy, but they can still qualify for the applicable central CFA.

Your final solar cost will still depend on the system size, city, equipment, roof conditions, and installation requirements. That is why it is important to compare the subsidy you are eligible for with the actual price of the system you plan to install.

If you are considering rooftop solar for your home, book a free consultation with Shree Rudra Power Systems. Our experts can help you understand the right system size for your electricity needs, estimate the applicable subsidy, and plan your rooftop solar installation accordingly.

Frequently Asked Questions

What is the last date for solar subsidy in Gujarat?

PM Surya Ghar is approved for implementation till 31 March 2027. Apply early so your system is commissioned, and your claim is filed well before the deadline.

Can housing societies, businesses, or farmers get a solar subsidy in Gujarat?

Housing societies can get a subsidy for common area solar for societies under PM Surya Ghar. Commercial and industrial connections are not covered by it. Farmers can look at PM-KUSUM.

Can I run 2 ACs on a 5 kW solar system in Gujarat?

Yes. A 5 kW solar system that generates 7,000-7,250 units of electricity every year can easily power 2 ACs (1.5 tons each).

Which solar panel is best in Gujarat?

Shree Rudra Power Systems’s latest 610-watt bifacial TOPCon solar panels are the latest technology panels that produce more power than standard 540-watt variants, and you need fewer 610-watt panels to make a system of the desired capacity than 540-watt modules. For the subsidy, choose Made-in-India DCR panels from a reputed brand with a solid performance warranty and after-sales support.

Will I get the new Gujarat solar subsidy if my solar system was installed before 22 October 2026?

No. The new Gujarat state subsidy is available only for eligible rooftop solar systems commissioned on or after 22 October 2026. Systems commissioned before this date do not qualify for the additional state subsidy.

Can I add more solar panels after receiving the Gujarat state subsidy?

No, not for three years from the installation date. If you receive the new Gujarat state subsidy, you cannot add further rooftop solar capacity during this period. Existing rooftop solar users can apply for additional subsidized capacity only if their total installed capacity remains within the 2.18 kWp limit.

The post Solar Rooftop Price List in Gujarat With and Without Subsidy appeared first on Rooftop Solar for your home and more | Shree Rudra Power Systems.

The scheme is managed by the Ministry of New and Renewable Energy (MNRE), with state DISCOMs acting as implementation partners for feasibility approval, net metering, and inspection.

As of August 2026, PM Surya Ghar Muft Bijli Yojana has benefited over 50 lakh households, commissioned 14.8 GW of rooftop capacity, and disbursed ₹28,024 crore in subsidy via Direct Benefit Transfer (DBT), as reported by PIB.

What is the National Portal for Rooftop Solar?

The original National Solar Portal (solarrooftop.gov.in) was launched by PM Narendra Modi on 30 July 2022 under Rooftop Solar Programme Phase II. In February 2024, it was migrated into the PM Surya Ghar: Muft Bijli Yojana portal at pmsuryaghar.gov.in, which is now the official National Portal for Rooftop Solar and the National Portal for Rooftop Solar Subsidy for all residential applications.

Any Indian consumer, or their chosen solar installer, can apply for net metering and subsidy directly on this national portal. Once the system is installed and commissioned, the subsidy is credited to the consumer’s bank account, typically within 30-45 days of DISCOM inspection.

How much subsidy can homeowners get when applying on the National Portal for Rooftop Solar Subsidy?

Under the PMSGY subsidy scheme, homeowners planning to install a residential rooftop solar system at their homes are eligible for a subsidy of ₹ 78,000 (capped at 3 kW and above). The following is the complete subsidy structure:

This works out to a 60% subsidy on the system cost for the first 2 kW, and 40% on the next 1 kW, with the subsidy capped at 3 kW capacity regardless of system size.

Note: These figures are per MNRE/PM Surya Ghar guidelines as reported in 2026.

CFA is released only after DISCOM inspection and successful commissioning, and does not apply retrospectively.

Why is the National Portal for Rooftop Solar a game-changer for residential solar?

Consumers are no longer dependent on a state-specific subsidy programme; any customer across every state and union territory can apply through the single National Portal for Rooftop Solar. Subsidy is disbursed directly to the consumer’s bank account under a Direct Benefit Transfer (DBT) model.

PM Surya Ghar also offers multiple solar financing options. The portal facilitates collateral-free loans of up to ₹2 lakh for residential rooftop solar systems, with concessional interest rates linked to the RBI repo rate. As of July 2026, the concessional rate was 5.75% per annum (repo rate + 50 basis points), with a repayment tenure of up to 10 years. Loans are processed through participating public-sector banks via the JanSamarth platform.

Source: Ministry of New and Renewable Energy (MNRE), Government of India / PIB- PM Surya Ghar: Muft Bijli Yojana, 28 July 2026

What is the process of applying for subsidy on the National Portal for Rooftop Solar?

Applying for a subsidy is a straightforward, fully online process once you know the sequence. Here’s exactly how a residential consumer moves from registration to receiving the subsidy in their bank account through the National Portal for Rooftop Solar.

1. Consumers can register and apply directly at pmsuryaghar.gov.in.
2. Alternatively, Shree Rudra Power Systems or your chosen solar company can handle the end-to-end application and subsidy process on your behalf.
3. Consumers can choose any solar company empanelled with their DISCOM.
4. Application progress can be tracked live on the National Portal for Rooftop Solar.
5. Bank account details must be updated on the portal; subsidy is credited directly after commissioning.
6. Solar companies are required to provide 4-5 years of after-sales and maintenance service for TOPCon and Mono PERC panels, respectively.

Shree Rudra Power Systems manages end-to-end applications, from net metering to subsidy disbursal, for all its customers.

Are there any conditions for availing subsidy under this scheme?

Before you apply, it helps to know exactly what qualifies and what doesn’t. The National Portal for Rooftop Solar Subsidy comes with two non-negotiable conditions that determine whether your application clears DISCOM approval.

Two conditions apply.

1. You can only choose solar companies empanelled with your state DISCOM.
2. Subsidy is available only on systems using ALMM (Approved List of Models and Manufacturers) List-I modules. From 1 June 2026, cells inside those modules must also come from ALMM List-II manufacturers for newly commissioned net-metering projects.

Why is this scheme a milestone for the solar industry?

Under the National Portal for Rooftop Solar, adoption continues to accelerate through hassle-free online applications, real-time tracking, and faster subsidy disbursement. Solar companies benefit from simplified empanelment and upfront payment from consumers, rather than waiting on DISCOM fund releases, improving cash flow and encouraging more industry participation.

Conclusion

India is firmly in the decade of home solarisation. With the National Portal for Rooftop Solar making applications easier to track and the government targeting 1 crore solar-powered households by 2027, going solar is becoming simpler and more affordable for Indian homeowners.

If you’re ready to apply on the National Portal for Rooftop Solar, Shree Rudra Power Systems handles the entire journey for you, from checking your eligibility and filing your application to installation, net metering, and following up on your subsidy disbursal. Get a free solar consultation with Shree Rudra Power Systems today.

Frequently Asked Questions

Can I apply for both state and national solar subsidy together?

In most states, only the National Portal for Rooftop Solar subsidy applies. Uttar Pradesh, Rajasthan, and Delhi are notable exceptions, where residents can combine the central subsidy with an additional state-level subsidy for a larger total benefit; check your state DISCOM for current top-up schemes.

Is the National Solar Portal the same as PM Surya Ghar?

Yes. The original National Solar Portal (launched in 2022) was migrated into the PM Surya Ghar: Muft Bijli Yojana portal in February 2024, which now serves as the National Portal for Rooftop Solar.

Is the subsidy the same for every state, or does it vary?

The central CFA amount (up to ₹ 78,000) is uniform nationwide. Some states layer on their own additional top-up subsidies, so the final benefit can vary depending on where you live.

Do I need to pay any fee to apply on the National Portal for Rooftop Solar?

No. MNRE advises consumers not to pay extra charges for applying through the portal or for net metering beyond the fees prescribed by the DISCOM. If a vendor asks for additional charges, report it to MNRE.

What documents do I need to apply on the National Portal for Rooftop Solar?

Identity proof, address proof, a recent electricity bill or consumer number, proof of house ownership, and bank account details for the subsidy credit.

The post One Nation, One National Portal for Rooftop Solar: Updated Procedure for Residential Solar Subsidy appeared first on Rooftop Solar for your home and more | Shree Rudra Power Systems.

Most of these issues have nothing to do with the solar installation itself. Instead, they arise from incorrect bank details, document mismatches, or data entry errors.

If you’re planning to apply for the rooftop solar subsidy, here’s a checklist of the ten most common mistakes to avoid.

Why Does a PM Surya Ghar Application Get Rejected? 

A PM Surya Ghar Muft Bijli Yojana application may be rejected if the application details, documents, or rooftop solar panel installation do not meet the scheme’s requirements. Common reasons include:

1. Incorrect or mismatched details in the application, such as consumer number or electricity connection details.
2. Incomplete or incorrect documents submitted during the application or subsidy process.
3. Ineligible electricity connection or property that does not meet scheme requirements.
4. Installation not meeting technical requirements or using non-compliant equipment.
5. Issues during DISCOM (Distribution Company) inspection, such as discrepancies between the approved application and the installed system.
6. Incorrect bank details, which can prevent subsidy disbursement.

In the following sections, we have talked about the most common reasons for rejection of PM Suryaghar Muft Bijli Yojana applications and how to fix them.

The 20 Most Common PM Surya Ghar Muft Bijli Yojana Rejection Reasons: And How to Fix Each

The following are some of the major reasons that your PM Surya Ghar Muft Bijli Yojana application is being rejected or stuck in a long process:

1. Unclear bank documents

Since the subsidy is paid via Direct Benefit Transfer (DBT), the bank documents you upload need to be fully legible. Blurry passbook copies, unclear cancelled cheques, faded bank statements, or a hidden account number/IFSC code all cause processing delays.

Fix: Upload properly scanned, high-quality documents, not phone photos taken at an angle.

2. Name mismatch across documents

The name on your electricity bill and your bank account should match exactly. “R.P. Verma” on the bill versus “Ram Pratap Verma” on the bank account is enough to trigger a correction request, even though it’s clearly the same person.

Fix: Make sure both documents use the same name format before you submit.

3. Document and form mismatch

Bank details are typed in manually during the application, and everything you enter must exactly match the documents you upload: account number, account holder name, and IFSC (Indian Financial System Code) code. A single wrong digit in the account number can delay payment, route the subsidy to the wrong account, or trigger a recovery process that’s difficult to reverse. Smaller mismatches in the name or IFSC are one of the most common causes of correction requests and processing delays.

Fix: Cross-check the form against your uploaded documents line by line before you submit. Ideally, have a second person read the account number back to you before you hit the submit button.

4. WCR report and DCR certificate errors

After installation, your vendor uploads the Work Completion Report (WCR) and the Domestic Content Requirement (DCR) Certificate. The module serial numbers on the DCR certificate must exactly match the numbers entered on the portal. A mismatch can look like a duplicate entry to the system and trigger rejection.

Fix: Ask your installer to verify every module serial number against the portal entry before it’s uploaded.

5. Using the wrong bank account type

The subsidy can only be credited to an active savings account. Applications linked to a Current Account, NRE (Non-Resident External) Account, PPF (Public Provident Fund) Account, Loan Account, or Cash Credit Account can be rejected outright.

Fix: Always provide an active savings account in your name.

6. Handwritten bank documents

Documents with handwritten corrections, a handwritten account number, pen corrections, or a manually written IFSC code are not accepted.

Fix: Upload only machine-printed, original bank documents; request a fresh printed copy from your bank if needed.

7. Non-empanelled vendor

If you’re applying for the PM Surya Ghar Muft Bijli Yojana subsidy, you must choose an empanelled solar installer, which means a vendor officially registered on the National Portal and eligible to carry out subsidized rooftop solar installations in your area. The subsidy is only released for systems installed by an MNRE (Ministry of New and Renewable Energy)-empanelled vendor. If you hire a local electrician or an unlisted installer because they quoted a lower price, the application gets rejected once verification catches it, and by then, the panels are already on your roof.

Fix: This one can’t be fixed after installation. Always check the vendor’s empanelment status on pmsuryaghar.gov.in before signing any agreement.

8. Non-ALMM-listed panels

Solar modules used for eligible subsidized rooftop solar installations must comply with the applicable Approved List of Models and Manufacturers (ALMM) requirements. A vendor may quote an approved panel initially but install a cheaper or different model later. Before installation, verify the exact manufacturer, module model, and manufacturing facility against the latest applicable ALMM list, and make sure the same details appear on your invoice and installation documents.

Fix: Ask for the ALMM certificate/model number in writing before installation, and verify it independently.

9. Electricity connection is not registered as residential

PM Surya Ghar CFA (Central Financial Assistance) is available to residential electricity consumers with grid-connected connections. If the connection is registered as commercial, industrial, or agricultural, the household cannot claim residential CFA even if the building is partly used as a home.

Fix: Check your connection category on your electricity bill before applying. If it’s wrongly classified, get it corrected with your DISCOM first.

10. Incorrect consumer number or DISCOM selected

The consumer number entered on the portal must correspond to the residential electricity connection under which the rooftop solar system is being installed. Entering the meter number instead, selecting the wrong DISCOM, or using an old consumer number can prevent the application from being verified.

Fix: Pull out your latest electricity bill and copy the consumer number and DISCOM exactly as printed, not from memory.

11. DCR non-compliance

For CFA, the system must comply with the applicable DCR (Domestic Content Requirement). DCR requires the applicable solar cells and modules to be manufactured domestically. Make sure that the solar system being installed on your roof uses only DCR panels.

From 1st June 2026, the applicable ALMM List-II requirements for solar cells also need to be considered.

Fix: Confirm with your vendor, in writing, that both modules and cells meet the applicable DCR/ALMM requirements before installation, not afterwards.

12. Installation or commissioning details are incomplete

After installation, the vendor must upload the required plant details and documents, following which the DISCOM verifies and commissions the system. Missing certificates, mismatched capacity, incorrect equipment details, unreadable photographs, or unresolved inspection observations can prevent the subsidy claim from progressing.

Fix: Ask your vendor to share copies of everything they’ve uploaded, and review it yourself before the DISCOM inspection to catch errors earlier.

13. Net meter or commissioning is still pending

If your panels are already installed but the subsidy hasn’t arrived, your application may not be rejected. It could simply be pending at a step such as DISCOM inspection, net metering process, net-meter commissioning, certificate approval, vendor submission, bank verification, or CFA approval.

Fix: Log in to the portal and check your application status stage-by-stage rather than assuming rejection; follow up with your vendor or DISCOM on whichever step is pending.

14. Application is flagged as a duplicate or previously suspended 

If a consumer number, bank account, or vendor combination was used in an earlier application (even one that was withdrawn or suspended), the system may flag a new submission as a duplicate entry. This can also happen if a household member applied earlier for the same connection.

Fix: Before reapplying, check with your DISCOM or the vendor whether any prior application exists against the same consumer number or account, and get it formally closed before submitting a new one.

15. PFMS name mismatch

Your name is validated against the Public Financial Management System (PFMS), which pulls it from your bank’s core banking records, not from the passbook you uploaded. Even if your electricity bill and passbook match, your application can still fail if your bank records show a different name. This could be due to initials, a missing middle name, or a maiden name that was never updated after marriage. This rejection often confuses applicants because every document they submitted looked consistent.

Fix: Ask your bank to confirm the exact name format recorded in their system, and enter that version on the portal. If your bank record itself is outdated, get it updated before you reapply.

16. Bank account validation pending or rejected

Before the subsidy is released, the account goes through a verification check. Accounts that are dormant, frozen, KYC-incomplete, or subject to transaction restrictions can fail this check even if every document you uploaded was correct. A basic savings account with a low transaction cap can also create problems when the subsidy amount is being credited.

Fix: Confirm with your bank that the account is active, fully KYC-compliant, and able to receive the credit. If it’s been inactive for a while, complete re-KYC and run a small transaction before you reapply.

17. Bank name or IFSC changed after a merger

Several public sector banks have merged in recent years, and the IFSC codes of the merged branches changed as a result. If your passbook or cancelled cheque still carries the old bank name and IFSC, the details won’t validate against current records, even though the account itself is perfectly active.

Fix: Check your current IFSC with your bank or on your bank’s official website, and use the updated bank name and IFSC in the application. Upload a fresh cheque leaf or passbook page carrying the revised details.

18. Missing undertaking form or government ID proof

The application requires a signed undertaking along with a valid government-issued ID proof. Applications are commonly sent back when the undertaking is unsigned, incompletely filled, uploaded in the wrong format, or submitted without the accompanying ID document. An ID whose name or address doesn’t line up with the rest of the application creates the same problem.

Fix: Download the current undertaking format from the portal rather than reusing an old copy, fill it completely, sign it, and upload it with a clear scan of your ID proof.

19. Builder, developer, or promoter undertaking not provided

If the rooftop isn’t solely yours, such as in an apartment building, a housing society, or a property where the builder still holds possession or roof rights, you need written consent from the builder, developer, promoter, or society before the installation can be approved. Applications from flat owners and society members are frequently held up here because this document was never arranged.

Fix: Get the undertaking or NOC from the builder or the society’s managing committee in writing before you apply. In a society, this usually means a resolution passed at a committee meeting, so start the process early.

20. Geo-tagged photo requirement

Installation photographs uploaded after commissioning need to carry geo-tagging, showing the location coordinates of the installed system. Photos taken on a camera without location services enabled, images cropped or edited after capture, or screenshots of photos can strip out this data and delay the claim.

Fix: Ask your installer to capture the photographs using a geo-tagging camera app with location enabled, and to upload the original files without editing or compressing them.

Permanent vs Fixable Rejections

Not every rejection is the end of the road. Knowing which bucket your case falls into saves you time and false hope.

Permanent (cannot be reversed after the fact):

1. Non-empanelled vendor: Any installation done by a vendor who is not registered on the PM Surya Ghar Muft Bijli Yojana portal will not be eligible for solar subsidy and, the subsidy for that property is permanently lost. The system may still function fine, but the solar subsidy is gone.
2. Non-ALMM-listed panels: If the panels installed aren’t on the approved list, there’s no way to retroactively qualify that installation for CFA (Central Financial Assistance).
3. DCR non-compliance: If the cells/modules installed don’t meet the applicable Domestic Content Requirement, including the ALMM List-II requirement for cells, the installation cannot be retroactively made compliant. Verification has to happen before installation.

Fixable (before or after rejection):

1. Bank document issues (blurry, handwritten, wrong account type, invalid document type): Correctable by uploading fresh, machine-printed documents from an active savings account.
2. Name, account number, or IFSC mismatches between the form and your documents: Correctable by updating records and resubmitting.
3. PFMS name mismatch: Fixable by confirming the exact name held in your bank’s core banking records and entering that version, or by getting the bank record itself updated.
4. Bank account validation pending or rejected: Fixable by activating a dormant account, completing re-KYC, or clearing any restriction with your bank, then resubmitting.
5. Bank name or IFSC changed after a merger: Fixable by obtaining the revised IFSC from your bank and uploading a fresh cheque leaf or passbook page.
6. Missing undertaking form or government ID proof: Fixable by downloading the current undertaking format, completing and signing it, and uploading it with a clear ID scan.
7. Builder, developer, or promoter undertaking not provided: Fixable by obtaining written consent from the builder or the society’s managing committee. Arrange this early, as society approvals can take time.
8. WCR/DCR certificate mismatches: Fixable by having the vendor re-verify and re-upload the correct serial numbers.
9. Geo-tagged photo requirement not met: Fixable by having the installer recapture the photographs with location services enabled and upload the unedited original files.
10. Wrong connection category (commercial/industrial/agricultural instead of residential): Fixable by getting the connection category corrected with your DISCOM, then reapplying.
11. Incorrect consumer number or DISCOM selected: Fixable by re-entering the correct consumer number and DISCOM as printed on your electricity bill.
12. Incomplete installation or commissioning details: Fixable by having the vendor upload the missing certificates, correct equipment details, or clearer photographs.
13. Pending net meter or commissioning: Not a rejection at all; resolves once the pending step (inspection, meter replacement, commissioning, vendor upload, etc.) is completed.
14. Flagged as duplicate or previously suspended: Fixable by getting any prior application against the same consumer number or account formally closed, then reapplying.

The golden rule: All three permanent rejection causes, which relate to your vendor and the equipment they install, are also 100% preventable before installation begins. They’re never discovered by accident. Verifying the vendor’s empanelment, the panel model, and DCR/ALMM compliance in writing at the start prevents every one of them.

The Pre-Installation Checklist: Prevent Subsidy Rejection Before It Happens

Before you finalize a solar company for your home rooftop solar installation, make sure you go through the following checklist:

1. Before choosing a vendor:

• Verify the vendor’s MNRE empanelment at pmsuryaghar.gov.in. Do not accept verbal confirmation.
• Confirm the vendor’s proposed panels are ALMM-listed. Ask for the MNRE certificate number.

2. Before registration on the portal:

• Verify the name on your electricity bill and bank account match exactly, including spelling, initials, and order.
• Upload a clear, machine-printed cancelled cheque or passbook copy from an active savings account. Avoid handwritten corrections, blur, or hidden IFSC/account numbers.
• Re-check every manually typed bank detail (account number, IFSC) against the uploaded document before submitting.
• Confirm your account is an active savings account, not current, NRE, PPF, loan, or cash credit.

3. After installation:

• Ask your installer to verify every module serial number on the DCR certificate matches the portal entry before it’s uploaded.
• Cross-check the final application form against every uploaded document, account number, name, and IFSC code before final submission.

What to Do If Your PM Surya Ghar Muft Bijli Yojana Application Is Rejected

A rejected PM Surya Ghar Muft Bijli Yojana online application doesn’t always mean you’ve lost your subsidy. In many cases, the issue can be identified, corrected, and the application resubmitted or escalated through the right channels.

Here’s a checklist on how to proceed once the application is rejected:

1. Get the rejection reason in writing: Log in to pmsuryaghar.gov.in and check your application status for the specific failure message. If it’s unclear, visit your local DISCOM section office in person.
2. Identify the problem: Whether the rejection is permanent or fixable using the breakdown above.
3. For fixable rejections: Rectify the specific issue, correct the name mismatch, re-upload a clear bank document, fix the DCR serial number mismatch, and resubmit the application as appropriate.
4. For DBT failure after commissioning: Raise a grievance directly at pmsuryaghar.gov.in under the grievance section, or call the PM Surya Ghar helpline at 15555.
5. If the DISCOM is unresponsive: Escalate to your state electricity regulatory commission, or file a consumer complaint through the DISCOM’s consumer grievance forum.
6. For complex disputes: Contact MNRE’s (Ministry of New and Renewable Energy) national helpline at 1800-180-3333, and keep a written record of all correspondence in case you need to escalate formally.

Conclusion

Most rooftop solar subsidy delays aren’t caused by government processing; they’re caused by simple documentation errors that can easily be avoided.

Since the PM Surya Ghar Muft Bijli Yojana scheme offers a subsidy of up to ₹78,000, it’s worth taking a few extra minutes to review every detail before submitting your application. A careful submission can help ensure faster approval and a smooth subsidy credit directly into your bank account.

If you’d rather avoid the paperwork altogether, Shree Rudra Power Systems takes care of the entire process for you, from designing your rooftop solar system and handling installation to managing subsidy documentation and application support. Our experts ensure your paperwork is accurate, complete, and submitted correctly, so you can focus on enjoying lower electricity bills instead of worrying about the subsidy approvals. Shree Rudra Power Systems has also helped its customers successfully receive more than ₹300 crore in rooftop solar subsidies to date (21st September 2026).

Get a free solar consultation and personalized quotation from Shree Rudra Power Systems today, and let our team help you make the switch to rooftop solar with complete peace of mind.

Frequently Asked Questions

Can I reapply for PM Surya Ghar subsidy after rejection?

Yes, for fixable rejections like bank document issues, name/account mismatches, DCR certificate errors, or incomplete portal steps, you can correct the issue and resubmit or continue the same application. Permanent rejections (non-empanelled vendor, non-ALMM panels) cannot be reapplied for.

Why is name mismatch such a common PM Surya Ghar rejection cause?

Because the subsidy is credited via DBT (Direct Bank Transfer), the system cross-checks your name across your electricity bill and your bank account. Even small differences in spelling or initials can cause an automatic mismatch flag, since these are separate databases that don’t always sync.

What does “non-ALMM panels” mean, and why does it cause the solar subsidy rejection?

ALMM (Approved List of Models and Manufacturers) is MNRE’s official list of panel makers and models eligible for subsidy schemes. If a vendor installs panels that aren’t on the approved list, the system may not qualify for CFA, even if the installation meets quality standards.

My PM Surya Ghar subsidy was not credited even after commissioning. What should I do?

First, check that your bank account is an active savings account and that the account number and IFSC code exactly match what you entered on the portal. If that’s confirmed and the amount still hasn’t arrived, raise a grievance on pmsuryaghar.gov.in or call the helpline at 15555.

Can a non-empanelled vendor’s work be “regularized” after installation to claim the subsidy?

No. Empanelment status is verified against the vendor at the time of installation, and there is no process to retroactively qualify a non-empanelled installation for CFA. This is why vendor verification has to happen before any contract is signed.

How long does it take to receive the PM Surya Ghar subsidy?

The time it takes to receive the PM Surya Ghar Muft Bijli Yojana subsidy depends on whether your application and documents are complete and accurate. Once your request is processed, the central subsidy is credited directly to your bank account via a direct transfer, usually within 30-45 days of the plant being commissioned. No cheque collection or office visit is needed.

What should I do if my solar subsidy application is returned for correction?

If your solar subsidy application is returned for correction, first check the reason mentioned on the PM Surya Ghar portal. Common issues include mismatched names, incorrect bank details, blurry document uploads, or errors in the DCR certificate or Work Completion Report (WCR). Correct the highlighted issue, upload the revised documents if required, and resubmit the application. If your rooftop solar system was installed by Shree Rudra Power Systems, our team assists you throughout the subsidy process, helping resolve documentation issues and ensuring your application is resubmitted correctly.

The post Why PM Surya Ghar Application Gets Rejected: 20 Reasons and How to Fix Them appeared first on Rooftop Solar for your home and more | Shree Rudra Power Systems.

Under the PM Kusum Yojana, the final cost depends on the state, pump capacity, and the scheme component selected. However, the government covers a significant share of the total cost, which means farmers have to pay only a small portion themselves.

The scheme supports three main types of projects.

• Farmers can install a standalone solar water pump
• They can convert an existing agricultural pump to solar power
• They can use their land to set up a decentralized solar power plant

In most cases, the commonly mentioned 60% subsidy includes 30% financial assistance from the central government and at least 30% support from the state government. The farmer pays the remaining ~40% amount. In some states, this share can also be financed through a bank solar loan, reducing the upfront payment further.

The exact subsidy, cost, and application process vary from one state to another. This guide explains how the PM Kusum Yojana works, what is its vision (kisanon ke liye PM kusum Yojana ka lakshya kya hai), how much subsidy farmers can receive, what different PM Kusum Yojana solar pumps may cost after the subsidy, who is eligible, and how to apply.

PM Kusum Yojana at a Glance

Before examining the subsidy, pump cost, and application process, here is a quick overview of the PM Kusum Yojana and its current implementation status.

Across all three components, PM Kusum solar yojana has an overall target of 34,800 MW of solar capacity. The approved central financial support for the scheme is ₹34,422 crore.

• Based on a press release by PIB (Press Information Bureau), more than 9.75 lakh standalone solar pumps had been installed under Component B of the scheme as of 31 December 2025.
• Under Component C, more than 12 lakh agricultural pumps had been solarized, either individually or through feeder-level solarization.

The completion deadline has been extended to 31 March 2027 for eligible projects where the Power Purchase Agreement (PPA) or Notice to Proceed was issued by 31 December 2025. This extension does not automatically apply to every new application or project under the scheme.

What Is the PM Kusum Yojana (PM Kusum Yojana Kya Hai)?

The PM Kusum Yojana is a central government scheme that promotes the use of solar energy in agriculture. It is implemented by the Ministry of New and Renewable Energy (MNRE).

The scheme is associated with subsidized solar water pumps, but its scope is much wider.

It supports farmers in three main ways:

1. Setting up small solar power plants on agricultural or barren land
2. Installing standalone solar pumps in areas without reliable grid electricity
3. Solarizing existing grid-connected agricultural pumps and feeders

Main Objectives of the PM Kusum Yojana

The scheme allows farmers to access a more reliable source of electricity for irrigation, reduce their dependence on diesel, and, in some cases, earn additional income by supplying surplus solar power to the grid.

Here are its main objectives:

• Improve energy security for farmers
• Provide a dependable source of power for irrigation
• Reduce the use of diesel-powered agricultural pumps
• Lower the cost of running irrigation systems
• Help farmers earn from surplus solar electricity
• Reduce pollution and promote clean energy in agriculture

In simple terms, the goal of PM Kusum Yojana is to give farmers a stable irrigation power supply while reducing their energy expenses.

Is PM Kusum the Same as PM-Kisan?

No, PM Kusum and PM-Kisan are two separate government schemes. Many times, people use the PM kisan kusum Yojana wrongly. In reality, both the schemes are different.

• PM Kusum Solar Yojana: It supports solar power plants, solar pumps, and the solarization of agricultural electricity systems.
• PM-Kisan Yojana: It provides direct income support to eligible farming families.

Enrolling in one scheme does not automatically register a farmer for the other.

PM Kusum Yojana’s Three Components: Which One Is Right for You?

The PM Kusum Yojana is divided into three components, and each serves a different purpose. The right component depends mainly on whether you have suitable land for a solar plant, need a new standalone solar pump, or already use a grid-connected agricultural pump.

Here are the details of all three components:

Under the current scheme targets, Component B covers 14 lakh standalone solar pumps. Component C covers the solarization of 35 lakh grid-connected agricultural pumps, including pumps covered through feeder-level solarization.

Which PM Kusum Component Covers a New Solar Pump?

Component B is meant for farmers who need a new standalone solar pump. It is most suitable for farms without an electricity connection, farms located far from the grid, and farmers who currently depend on diesel pumps.

The system operates independently using solar power and does not require a regular grid connection.

Which Component Covers an Existing Electric Agricultural Pump?

Component C applies when a farmer already has a grid-connected agricultural pump. Solar panels are added to supply electricity to the existing pump, allowing it to run on solar power during the day.

Depending on the project design, the pump may be solarized individually or receive solar electricity through a dedicated agricultural feeder.

Can Every PM Kusum Solar Pump Sell Electricity?

No, the ability to sell electricity depends on the component and the type of system installed.

• Under Component A, electricity generated by the solar plant is sold to the DISCOM under a power purchase arrangement.
• Component B pumps are standalone systems and generally not connected to the electricity grid. They, therefore, do not export or sell power.
• Under Component C, surplus electricity may be sold to the grid in some cases, but this depends on the system configuration and the rules followed by the state government or DISCOM.

PM Kusum Yojana Subsidy Explained

Under the standard PM Kusum solar pump yojana subsidy structure, the central government covers 30% of the project cost, and the state government provides at least another 30%. This is why the scheme is commonly described as offering a 60% subsidy.

Here’s a clear breakdown of how much the farmer has to pay:

A farmer may not always have to pay the entire 40% contribution upfront. Where bank finance is available, the farmer may pay ~10% initially and take a loan for the remaining non-subsidized amount. However, this loan is not an additional subsidy. It must be repaid to the bank according to the applicable loan terms.

Subsidy in North-Eastern, Hilly and Island Regions?

Higher central assistance is available in certain North-Eastern, hilly, and island regions. These include the North-Eastern states, Sikkim, Jammu and Kashmir, Ladakh, Himachal Pradesh, Uttarakhand, Lakshadweep, and the Andaman and Nicobar Islands.

Here’s a clear breakdown:

PM Kusum Yojana Price List and Solar Pump Cost

There isn’t an official standardized PM Kusum Yojana price list that applies nationwide. Each state selects vendors through its own tender process, and the approved cost of a solar pump, therefore, differs by location, system type, and application year.

The table below shows indicative prices based on standard market research. The amount paid by the farmer will be lower after the applicable central and state subsidies are deducted.

*Please note: The solar pump price range listed in the section above is just an indicative range, based on standard market estimates. The actual cost can vary based on the brand, GST inclusion or exclusion, pump type, promotional offers, and even your city. Shree Rudra Power Systems does not provide solar water pumps or facilitate solar installation for farmers under the PM Kusum Yojana. We install rooftop solar at homes, housing societies, and commercial and industrial buildings.

How to Check the Official PM Kusum Price List?

To find the correct price for your state, visit the PM Kusum Yojana official website or the website of your State Implementing Agency.

Then, follow these steps:

1. Select your state and the relevant scheme component
2. Choose the required pump capacity
3. Select an AC or DC system
4. Choose between a surface and submersible solar pump
5. Check the approved vendor and tender price
6. Confirm how much subsidy applies and how much the farmer must pay
7. Verify whether installation, GST, piping, and other required work are included in the quoted amount

Always rely on the latest state tender or beneficiary notice rather than unofficial price lists, since approved costs and farmer contributions can change from one application round to another.

What Solar Pump Capacity Can a Farmer Get?

For most individual farmers, the PM Kusum solar pump yojana subsidy is available for solar pumps of up to 7.5 HP.

A farmer may choose a pump with a higher capacity, but the central subsidy is generally calculated only on the cost of a 7.5 HP system. The farmer bears any additional cost for the higher-capacity pump.

Higher-capacity systems may also be supported for group or cluster irrigation projects. In such cases, the eligible capacity is calculated based on the number of participating farmers and the irrigation requirements of the group.

Who Is Eligible for PM Kusum Yojana?

A farmer can meet the basic eligibility conditions and still not receive a solar pump in that application cycle. PM Kusum Yojana is demand-driven. Which is why selection depends on the target allotted to the state, available capacity, and the rules followed by the state implementing agency.

The following applicants may be eligible:

• Individual farmers
• Groups of farmers
• Farmer Producer Organisations
• Cooperatives
• Panchayats
• Water User Associations
• Primary Agricultural Credit Societies, where permitted by the state

Renewable power generators and project developers may also apply under Component A to set up decentralized solar power plants.

Documents Required for PM Kusum Yojana Registration

One small mismatch in your records can slow down verification. For example, if the name on your Aadhaar card does not match the name in your land record or bank account, the application may require correction or additional verification before it can move ahead.

Although the exact document list varies by state, applicants are generally asked to submit:

• Aadhaar card
• Mobile number linked to Aadhaar
• Land ownership or tenancy records, such as khasra, khatauni, or 7/12 extract
• Bank passbook or bank account details
• Passport-size photograph
• Existing agricultural electricity connection details for Component C
• Any additional declaration or certificate required by the state agency

Farmers should make sure that the name and other details on their Aadhaar card, land records, and bank account match.

How to Apply for PM Kusum Yojana Online?

The PM Kusum applications are generally handled through state portals rather than one common national application form. The exact process may differ slightly by state, which means PM Kusum Yojana online registration in UP might differ slightly from how registration is done for PM Kusum Solar Pump Yojana in Maharashtra, Rajasthan, and so on.

However, most applications follow these steps for PM Kusum Yojana online registration:

• Step 1 – Identify the correct component: Apply under Component B if you need a new standalone solar pump and choose Component C if you already have a grid-connected agricultural pump and want to solarize it.
• Step 2 – Find your State Implementing Agency: Check which department, renewable energy agency, electricity distribution company, or state corporation is responsible for PM Kusum solar yojana in your state.
• Step 3 – Check whether applications are currently open: States accept applications only during specific registration periods and within their allotted targets. Confirm that the application window is active before starting the process.
• Step 4 – Complete mobile and identity verification: Create an account using your mobile number and complete the required identity verification. Many state portals use an OTP (one time password) sent to an Aadhaar-linked mobile number.
• Step 5 – Enter land, water-source, and pump details: Provide information such as your land survey number, water source, existing electricity connection, required pump capacity, and the type of pump needed.
• Step 6 – Upload the required documents: Upload your Aadhaar card, land records, bank details, photograph, and any other documents requested by the state portal.
• Step 7 – Pay only through the authorized portal: Make payments only through the official state portal or another authorized government payment channel. Never ever transfer money to a private bank account or an unknown agent.
• Step 8 – Application verification and beneficiary selection: The state agency will verify the application, check eligibility, and select beneficiaries based on available targets and applicable state rules.
• Step 9 – Vendor allocation and site survey: Once selected, an empanelled vendor or authorized agency may inspect the site to confirm the water source, land conditions, pump requirement, and installation feasibility.
• Step 10 – Installation and commissioning: The approved vendor will install the solar pump system. After inspection and successful commissioning, the project is recorded as completed under the scheme.

State-Wise PM Kusum Application Portals

State governments manage PM KUSUM applications through their designated renewable energy agencies, agriculture departments, or electricity distribution companies. Farmers should apply through the official portal notified for their state.

The table below lists the main agency or application route used in major states. Farmers should use it to identify the correct state authority before checking whether PM Surya Ghar registrations are currently open.

Benefits of PM Kusum Solar Pumps

PM Kusum solar pumps can reduce irrigation costs, improve access to daytime power, and create additional income opportunities for farmers.

Their main benefits include:

• Lower irrigation costs: Solar pumps eliminate the recurring cost of diesel and reduce dependence on paid grid electricity. Once installed, the fuel cost of running the pump is close to zero.
• Daytime power for irrigation: Farmers can operate the pump during daylight hours instead of waiting for irregular or late-night electricity supply.
• Additional income opportunities: Under Component A and eligible Component C projects, farmers may earn money by selling electricity to the DISCOM or using their land for a solar power project.
• Lower pollution: Replacing diesel pumps with solar PV systems reduces fuel consumption, emissions, and local air pollution.
• Reduced pressure on state power subsidies: Solar-powered irrigation can lower the electricity subsidy burden on state governments and DISCOMs.

Limitations and Practical Considerations of PM Kusum Yojana

While the PM Kusum Yojana can significantly reduce the cost of installing and operating a solar pump, farmers should understand a few practical limitations before applying.

• Applications depend on state targets: Each state and district receives a limited allocation. Registration may close once the available target is filled, and farmers have to wait for the next application cycle.
• Subsidy support is usually capped at 7.5 HP: For most individual farmers, central assistance is calculated only up to a 7.5 HP pump.
• Component B pumps cannot sell electricity: These are standalone, off-grid systems designed to run agricultural pumps. Since they are not connected to the grid, they cannot export surplus power.
• Applying does not guarantee selection: The state implementing agency verifies applications and selects beneficiaries based on eligibility, available targets, and state priorities. A successfully submitted form is only an application, not a confirmation of approval.

PM Kusum Yojana Official Website and Fraud Warning

PM Kusum Yojana can make solar pumps affordable for farmers, but the application must be completed through the correct government channel. Before registering, paying a fee, or selecting a vendor, verify the official portal for your state through the PM Kusum Yojana official website.

• Fraudulent websites, mobile apps, agents, and WhatsApp contacts may use names that sound similar to PM Kusum and ask farmers to pay registration charges or pump costs. Do not transfer money to a personal bank account, private UPI ID, or an unverified contact.
• Use the MNRE PM Kusum portal for official scheme information and only the designated state agency or state-government portal for applications and payments.
• After every transaction, save the payment receipt, acknowledgement, and application number.

The safest approach is simple. Verify the portal, check the latest state notification, and pay only through an authorized government channel.

Frequently Asked Questions

Can a state offer more than 30% subsidy under the PM Kusum Yojana?

Yes, the standard state contribution is at least 30% of the approved cost, but a state may provide additional financial support through its own schemes. This can reduce the amount that the farmer has to pay. Farmers should check the latest state notification because the subsidy structure can differ by location and application round.

What does benchmark cost or tender cost, whichever is lower, mean in the PM Kusum scheme?

MNRE (Ministry of New and Renewable Energy) sets a benchmark cost for eligible solar pump systems, while states also discover prices through their tender process. The central subsidy is calculated on whichever of these two amounts is lower. For example, if the benchmark cost is ₹3 lakh but the state tender price is ₹2.7 lakh, the subsidy will be calculated at ₹2.7 lakh.

Does the farmer pay only 10% of the solar-pump cost?

This is not true in every case. Under the standard subsidy structure, the central and state governments together generally cover 60% of the approved cost. The farmer is responsible for the remaining 40%. Where bank finance is available, the farmer may pay around 10% initially and take a loan for another 30%. That 30% is a repayable bank loan, not an additional subsidy.

What is the cost of a 3 HP solar pump under PM Kusum Yojana?

A 3 HP solar pump system may cost ~₹1.8 lakh* to ~₹2.5 lakh* before subsidy, depending on the state tender and system specifications.

*Please note: The solar pump price range listed in the section above is just an indicative range, based on standard market estimates. The actual cost can vary based on the brand, GST inclusion or exclusion, pump type, promotional offers, and even your city. Shree Rudra Power Systems does not provide solar water pumps or facilitate solar installation for farmers. We install rooftop solar at homes, housing societies, and commercial and industrial buildings.

What is the cost of a 5 HP solar pump under PM Kusum Yojana?

A 5 HP solar pump system may cost ~₹3 lakh* to ~₹3.5 lakh* before subsidy, depending on the state tender and system specifications.

*Please note: The solar pump price range listed in the section above is just an indicative range, based on standard market estimates. The actual cost can vary based on the brand, GST inclusion or exclusion, pump type, promotional offers, and even your city. Shree Rudra Power Systems does not provide solar water pumps or facilitate solar installation for farmers. We install rooftop solar at homes, housing societies, and commercial and industrial buildings.

How do I apply for PM Kusum Yojana in Uttar Pradesh?

For a new standalone solar pump under Component B, farmers should check the latest registration notice issued through the Uttar Pradesh Agriculture Department or the concerned district agriculture office. For Component C, UPNEDA operates dedicated KUSUM C-1 and C-2 portals. Applications should be submitted only when the relevant state registration window is open.

How do I apply for PM Kusum in Maharashtra?

Farmers in Maharashtra can apply through MSEDCL’s Magel Tyala Saur Krushi Pump Yojana portal. The portal provides services for submitting an application, checking its status, making the beneficiary payment, and raising complaints. Payments should be made only through the authorized MSEDCL system.

Can a farmer with an electricity connection apply?

Yes, a farmer who already has a grid-connected agricultural pump may be eligible under Component C. This component supports the solarization of existing agricultural pumps, either individually or through feeder-level solarization.

What is the official website for PM Kusum Yojana?

The National Portal for PM-Kusum, managed by MNRE, should be used for central scheme information and official updates. Applications and payments are generally handled through the designated state implementing agency. Farmers should verify the state portal through official government sources before sharing documents or making any payment.

The post PM Kusum Yojana for Solar Pumps: Subsidy, Cost & Application Process appeared first on Rooftop Solar for your home and more | Shree Rudra Power Systems.

• Eligible poor households give consent for a free 1.1 kW rooftop solar system
• The electricity department installs it at no cost to the family

BPL families receive the standard PM Surya Ghar Muft Bijli Yojana central subsidy, not a separate enhanced slab. The Bihar state government covers the remaining cost, so the installation is completely free for poor households.

This guide explains what the Kutir Jyoti Yojana is and what it offers in 2026, who qualifies, how the cost split works, and how to apply through the Suvidha app.

Quick Overview of the Kutir Jyoti Yojana in Bihar in 2026

The table below summarizes the core details of the Kutir Jyoti Yojana in Bihar.

What is Kutir Jyoti Yojana?

Kutir Jyoti Yojana is a government electricity-support scheme for poor households. It is now also extended to Bihar and is run by the Bihar government as a free rooftop solar program for below-poverty-line households.

• The Government of India first launched the Kutir Jyoti Yojana in 1988-89, during the Nehru Centenary year, to provide single-point lighting connections to rural BPL households.
• That original program was later merged into the Rajiv Gandhi Grameen Vidyutikaran Yojana and is now part of the Deendayal Upadhyaya Gram Jyoti Yojana.

In Bihar, the same Kutir Jyoti beneficiary base is now being used for a free rooftop solar program for BPL households. The scheme is run through Bihar State Power Holding Company Limited, or BSPHCL. It is supported by two government schemes:

• The central PM Surya Ghar Muft Bijli Yojana covers Rs. 33,000.
• The Bihar government’s Mukhyamantri Vidyut Upbhokta Sahayata Yojana covers Rs. 27,000.

Together, these two schemes cover the full Rs. 60,000 cost of a 1.1 kW rooftop solar system.

Sources: CM Bihar.gov.in, BSPHCL Memo

What is the Bihar State Government’s Target for Kutir Jyoti Yojana?

Bihar aims to cover 58.89 lakh BPL households across the state with free rooftop solar under the Kutir Jyoti Yojana. The government implements this in phases rather than installing it in every household at once, and it has budgeted ~Rs 16,000 crore to complete the full rollout using existing subsidy allocations.

• Phase 1 of the Kutir Jyoti Yojana in Bihar: The first phase targeted ~2.5 lakh Kutir Jyoti consumers under the 275 MW project approved by BERC (Bihar Electricity Regulatory Commission) in June 2026. The phase 1 application window is now closed.
• Future phases not yet announced: The Bihar government has not yet announced the next phase windows. The remaining households within the 58.89 lakh target will be covered in later rounds, and eligibility does not expire if a family misses one window. Such families simply apply when the next window opens.

Source: UNI India

The Two Pillars of the Kutir Jyoti Yojana in 2026

In Bihar, the Kutir Jyoti Yojana is linked to two separate electricity benefits in 2026.

• One benefit applies to all domestic consumers: This includes 125 free electricity units every month.
• The other is only for BPL households or Kutir Jyoti connection holders: This includes installing a 1.1 kW rooftop solar system for free.

Let’s break down both the benefits carefully.

Pillar 1: 125 Units of Free Electricity Per Month to All Domestic Consumers

Under the Mukhyamantri Vidyut Upbhokta Sahayata Yojana, every household in Bihar now receives 125 units of electricity free of charge every month. This benefit started from the July 2025 electricity bill.

• The consumer does not need to apply separately.
• The electricity department automatically adjusts the benefit in the monthly bill.

This free-electricity support is expected to benefit around 1.67 crore households in Bihar. The state government has approved ~Rs. 3,797 crore to fund it.

Pillar 2: Free Rooftop Solar Panel Installation to BPL and Kutir Jyoti Connection Holders

This second benefit is only for BPL households and existing Kutir Jyoti connection holders. Under this benefit, eligible households can get a 1.1 kW rooftop solar system installed at no cost. This free rooftop solar installation is not available to every domestic consumer in Bihar.

• To receive it, the household must give consent via the Suvidha app.
• After that, the electricity department can process the installation.

This is the benefit most closely associated with the Kutir Jyoti Yojana in Bihar today.

How Does the Kutir Jyoti Yojana Work and How Much Does it Cost?

Solar panel installation for BPL families is free under the Kutir Jyoti Yojana in Bihar because the central and state governments split the total installation cost. Two panels are installed, and the system capacity is 1.1 kW.

Here’s how the scheme works:

• Total system cost: Each 1.1 kW rooftop PV system costs ~Rs. 60,000.
• Central share: PM Surya Ghar Muft Bijli Yojana contributes Rs. 33,000.
• State share: The Bihar government covers the remaining Rs. 27,000, taking the subsidy to a full 100%.
• Zero out-of-pocket cost for BPL households: The household does not have to arrange the installation itself. The state electricity department manages the process, including procurement and installation. Once the household gives the required consent, the department takes the process forward. So, the family does not pay for the panels, installation, or setup at any stage.

How Does Kutir Jyoti Yojana in Bihar Connect to PM Surya Ghar and Free Electricity?

The Kutir Jyoti Yojana in Bihar is not running on its own. It is linked to two other government benefits, namely, the PM Surya Ghar Muft Bijli Yojana and the state’s 125-unit free electricity scheme.

This connection matters because BPL households do not just get one benefit. They can get free monthly electricity support and a free rooftop solar system.

Here is how the link works:

• 125 free units a month: All domestic consumers in Bihar get up to 125 units of electricity free every month from the July 2025 bill. This benefit falls under the Mukhyamantri Vidyut Upbhokta Sahayata Yojana and is automatically applied to the electricity bill.
• PM Surya Ghar link: The rooftop solar part is linked to the central PM Surya Ghar Muft Bijli Yojana. For each 1.1 kW solar system, the central government provides Rs. 33,000.
• Bihar government support: The Bihar government adds Rs. 27,000 more for BPL and Kutir Jyoti households. Together, the central and state support covers the full Rs. 60,000 cost of the solar system.

A BPL household gets 125 units of free electricity every month, as well as a 1.1 kW rooftop solar system, totally free of cost, to generate additional power on top of the free 125 units.

Bihar is using this combined push to expand solar adoption across the state, with a target of adding 10,000 MW of solar power over three years.

What are the Benefits of the Kutir Jyoti Yojana for BPL Families?

The Kutir Jyoti Yojana provides BPL families with a free solar asset that generates free solar electricity, reducing their electricity bills and replacing unsafe lighting. The benefits below explain what a household actually gains.

• Zero installation cost: The electricity department covers the full cost of procurement and installation for eligible BPL families, with Rs. 60,000 split between central and state assistance. As a result, the BPL family has to pay nothing to install a rooftop solar system at home.
• Reducing the electricity bill burden for poor families: The solar system powers the home during the day, so the family uses less grid electricity. The money they save on electricity can be used for food, shelter, clothing, and even education.
• Cleaner home lighting: Solar power reduces the need for kerosene and earthen lamps, which cost money and can create smoke inside the house.
• Extra savings with 125 free units: BPL households also get 125 units of free electricity every month, so the solar benefit reduces their bill even further.
• Maintenance is covered: Under the RESCO model, the developer handles operations and maintenance for 10 years. As a result, the BPL family does not have to pay anything out of pocket to maintain the solar system.

Who is Eligible for the Kutir Jyoti Yojana in Bihar?

Eligibility for the free rooftop solar under the Kutir Jyoti Yojana in Bihar is limited to BPL or Kutir Jyoti electricity consumers with a suitable rooftop.

The conditions below decide whether a household can give consent:

• Existing Kutir Jyoti or BPL connection: The household must hold a BPL (below-poverty-line) domestic electricity connection in Bihar.
• Rural and economically weak families: The scheme prioritizes economically weak families, including those in rural areas of the state.
• Valid consumer number: The applicant needs a valid consumer number, also called a CA number.
• Suitable rooftop: The home must have a permanent, concrete roof of at least 64 square feet that remains free of shade, since each 1.1 kW unit uses two panels.

Documents Required for Kutir Jyoti Yojana

To apply for a free rooftop solar system under the Kutir Jyoti Yojana, a BPL household needs to furnish a BPL card as proof of eligibility, the electricity consumer number from the bill, a registered mobile number for OTP verification, and a rooftop photo with basic area details.

How to Apply for Kutir Jyoti Yojana on the Suvidha App?

A BPL household in Bihar can apply for a free rooftop solar system under the Kutir Jyoti Yojana by providing digital consent on the Suvidha app.

Follow these steps in order.

1. Download the SUVIDHA app from the Google Play Store or the App Store.
2. Open the dashboard and tap “Consent for Rooftop Solar Panel Installation (Kutir Jyoti)”.
3. Enter your Consumer ID and tap Fetch Details.
4. Verify the OTP sent to your registered mobile number.
5. Fill the application form with your personal and roof details.
6. Upload the BPL card, address proof, and rooftop photograph.
7. Submit the form and note the confirmation.

Please note: Beneficiaries who do not have a smartphone to apply online can visit a Suvidha counter at the divisional electricity office or a Vasudha Kendra for free assistance. The entire process is free at every counter, so a family should not pay any agent who demands money for the application.

Conclusion

The Kutir Jyoti Yojana gives eligible BPL households in Bihar a free 1.1 kW rooftop solar system worth Rs. 60,000. This cost is fully covered through the Rs. 33,000 PM Surya Ghar central subsidy and the Rs. 27,000 Bihar government support. Along with the 125 free units of electricity every month, this can help a BPL family run its basic household load with very little or no electricity bill.

Shree Rudra Power Systems does not currently operate in Bihar or serve the BPL segment covered under this scheme. But if you are a homeowner in one of the 29 cities where we are present and want to install rooftop solar for long-term savings, we can install solar built for 25 years of performance with wind resistance of up to 170 km/hr, and assured power generation backed by a money-back promise.

Book a free consultation with Shree Rudra Power Systems to get started.

FAQs

Is Kutir Jyoti Yojana completely free for BPL families?

Yes, a BPL household pays nothing for the 1.1 kW solar system or its installation, since the Rs. 60,000 cost is split between a Rs. 33,000 PM Surya Ghar central subsidy and a Rs. 27,000 Bihar state share.

What panel size do beneficiaries get under Kutir Jyoti Yojana?

Each beneficiary gets a 1.1 kW system made of two panels. With current market modules of 500-550 Wp each, two panels add up to 1.1 kW of capacity.

Which app is used to apply for the Kutir Jyoti Yojana in Bihar?

Applicants can use the SUVIDHA app, available on the Google Play Store and the App Store, and give consent through the Kutir Jyoti rooftop solar option.

Who maintains the solar panels after installation?

Under the RESCO model, the selected developer runs plant operation and overall maintenance for ten years.

Can I apply if I do not have a smartphone?

Yes, you can apply free of charge at a Suvidha counter in the divisional electricity office, a Vasudha Kendra, or a local camp.

Is Kutir Jyoti Yojana the same as PM Surya Ghar?

No, they are not the same. PM Surya Ghar Muft Bijli Yojana is the central subsidy scheme, and Bihar runs the Kutir Jyoti Yojana under it for BPL families by adding a state top-up that makes the solar system fully free.

Do I need to apply for the 125 units of free electricity in Bihar?

No, the electricity department applies the 125 free units automatically to domestic consumers, so only the rooftop solar benefit needs Suvidha app consent.

What is the size of the solar panel installed free under Kutir Jyoti Yojana?

The BPL household can get a 1.1 kW rooftop solar system installed free of cost in Bihar under the Kutir Jyoti Yojana.

The post Kutir Jyoti Yojana in Bihar for BPL Families in 2026 appeared first on Rooftop Solar for your home and more | Shree Rudra Power Systems.

But the Soura rooftop solar scheme is often misunderstood. Unlike common belief, it is not a separate Kerala state subsidy program. The only solar subsidy in Kerala is the central government’s PM Surya Ghar Muft Bijli Yojana, capped at ₹ 78,000 for systems with a capacity of 3 kW or higher. The subsidy comes under the central PM Surya Ghar Muft Bijli Yojana, while Soura is KSEB’s rooftop solar programme for facilitating installations and related approvals in Kerala.

This guide breaks down what the Soura rooftop solar scheme actually is, how it connects to the PM Surya Ghar Muft Bojli Yojana, the subsidy you can claim and who qualifies for it, the step-by-step application process, how net metering settles your solar bill at the end of the year through KSEB, and the rooftop solar financing options that make rooftop solar affordable for everyone.

What is the Soura Rooftop Solar Scheme?

The Soura scheme is the rooftop solar program run by the Kerala State Electricity Board (KSEB) for homes and housing societies across the state. Under the scheme, you install solar panels on your own roof, run your home during the day on the solar electricity those panels produce, and send surplus units you do not use back into the KSEB grid.

The central government’s solar subsidy brings down what you pay to install the rooftop solar system, and net metering makes sure you earn credit for the surplus you export. More than 35,000 customers in Kerala have already gone solar through the Soura rooftop solar scheme.

Who Launched the Soura Rooftop Scheme?

The Soura rooftop solar scheme was launched and is run by KSEB, Kerala’s electricity distribution licensee.

KSEB introduced the scheme to help Kerala add more rooftop solar capacity and reduce its dependence on power purchased from outside the state. When the Soura rooftop scheme began, KSEB aimed to bring rooftop solar to 75,000 homes and add 350 MW of rooftop solar capacity across Kerala.

• The scheme was originally linked to the central government’s Grid-Connected Rooftop Solar Programme Phase II, under which Kerala received a rooftop solar capacity allocation from MNRE.
• Later, after the PM Surya Ghar Muft Bijli Yojana was launched in 2024, the older Phase II rooftop solar programme was subsumed under PM Surya Ghar.

So, for Kerala homeowners today, the only subsidy available is the PM Surya Ghar Muft Bijli Yojana. Soura scheme is the KSEB route through which rooftop solar applications, installation, and subsidy processing are handled in Kerala.

What is the Main Goal of the Soura Scheme?

The Soura rooftop solar scheme is built around a few connected goals.

• Lower household bills: Every electricity unit your solar system generates is a unit you no longer buy from the KSEB grid.
• Wider solar adoption: It makes the switch to solar realistic for ordinary homes, not just large buildings.
• Less strain on the grid: Solar power made on the roof reduces what KSEB has to supply from conventional sources.
• Generation at the point of use: Electricity is produced where it is consumed, which avoids the losses that come from carrying it long distances.
• Better use of scarce space: Kerala has little spare land for large solar farms, so rooftops do the work instead.

Now, let’s find out the status of the Soura Rooftop Solar Scheme in 2026.

Soura Rooftop Solar Scheme Status in 2026

The Soura rooftop solar scheme does not work exactly the way it did when it was first launched.

• In its earlier phase: The Soura rooftop solar scheme followed the older MNRE solar subsidy structure, under which eligible residential consumers could receive up to 40% central support. Registrations were initially handled through KSEB’s own system.
• In the later phase: The process moved to Kerala’s E-Kiran portal, and the earlier subsidy registration route was paused during the transition.
• For homeowners applying in 2026: The subsidy falls under the PM Surya Ghar Muft Bijli Yojana. KSEB’s role is to process and support rooftop solar applications in Kerala through the Soura route.

This change also makes it important to understand how the Soura program differs from the PM Surya Ghar Muft Bijli Yojana.

Is Soura Rooftop Solar Scheme Different from the PM Surya Ghar Muft Bijli Yojana?

The Soura rooftop solar scheme is not a Kerala state subsidy, even though its name and KSEB’s involvement make it look like one. Here is what is actually happening.

• The subsidy grant is central: The subsidy is funded by the Ministry of New and Renewable Energy and reaches the end customer through the PM Surya Ghar Muft Bijli Yojana.
• Soura scheme is the delivery channel: It is KSEB’s program for organizing the subsidy and the installation, not a separate fund the state has set aside.
• KSEB manages everything related to the grant: This includes the tendered pricing, the approved vendor list, the feasibility check, net metering, and the upfront deduction handled under the Soura tender model.

So, when you hear it called the KSEB subsidy or the Kerala subsidy, that describes who hands it to you, not who pays for it.

How the Soura Scheme Connects to the PM Surya Ghar Muft Bijli Yojana?

From your side as a homeowner, the two work as a single process. PM Surya Ghar provides financial benefits, and KSEB is the local body that makes it happen.

• PM Surya Ghar Muft Bijli Yojana provides the subsidy: It is the central scheme that determines how much financial assistance you receive from the government.
• KSEB is your discom: As the distribution company, it reviews and clears your rooftop solar installation application in Kerala.

Two portals carry the work between them.

1. You register and file your subsidy claim on the PM Surya Ghar Muft Bijli Yojana National Portal for Rooftop Solar.
2. KSEB’s E-Kiran portal handles feasibility approval, empanelled developer selection, and net meter or smart meter installation.

Why is the Soura Rooftop Solar Scheme Important for Kerala?

The Soura rooftop solar scheme is important because it helps Kerala solve the problem of limited land for large solar projects, rising household electricity bills, and dependence on power purchased from outside the state.

Let’s understand the importance of the scheme in detail:

• Limited land makes rooftop solar more practical: Kerala’s dense towns, smaller plots, and high land value make large solar farms difficult to scale. Rooftop solar works better because it uses existing roof space without needing extra land.
• Kerala households can reduce high electricity bills: A rooftop solar system can lower electricity bills by 90% or more, and continue generating free power from solar radiation for 25+ years.
• It supports Kerala’s renewable energy targets: Each grid-connected rooftop solar system adds renewable energy capacity to the state and helps Kerala move towards a cleaner electricity mix.
• It gives homeowners more control over energy costs: Once your rooftop system covers most of your electricity use, yearly tariff hikes affect you less. You still stay connected to the grid, but a large share of your power comes from your own roof.

For most homeowners, the next question is how much subsidy they can receive when installing rooftop solar. Let’s tackle that.

How Much Solar Subsidy Can You Receive Under the PM Surya Ghar Solar Scheme in Kerala 2026?

The maximum subsidy that homeowners in Kerala receive under the PM Surya Ghar Muft Bijli Yojana is ₹ 78,000 for systems of 3 kW or more. Here’s the tiered subsidy structure for homes:

• Solar subsidy in Kerala for systems up to 2 kW: ₹ 30,000 per kW
• Solar subsidy in Kerala for additional capacity up to 3 kW: ₹ 18,000
• Solar subsidy cap in Kerala for systems equal to or above 3 kWp: ₹ 78,000

Here’s a snapshot of the total rooftop solar subsidy in Kerala for different-capacity solar systems:

For housing societies, the PM Surya Ghar Muft Bijli Yojana subsidy is ₹ 18,000 per kW, capped at ₹ 90 lakh for systems of 500 kW or more.

Here’s a snapshot of the solar subsidy in housing societies for different capacity solar systems:

The Three Soura Rooftop Solar Scheme’s Business Models Explained

KSEB runs three solar adoption business models, and the right one for you depends on whether you want to own the system, avoid upfront cost, or simply earn from your roof.

• CAPEX model, where you own the system: Under the CAPEX model, you pay for the rooftop solar system and own it completely. This means the electricity generated by the system directly reduces your bill, and you get the full financial benefit. The main advantage is that your long-term savings are higher because the system belongs to you. The trade-off is that you need to pay the upfront cost.
• RESCO model, where the developer owns it: Under the RESCO model, a solar developer installs and operates the system on your roof. You do not have to pay the full installation cost upfront. Instead, you buy the electricity generated by the system, usually at an agreed rate, as listed in the solar power purchase agreement (PPA). This model works for consumers who want solar savings without making a large initial investment.
• Third party, where you lease your roof: Under this model, you allow a developer to use your roof for a solar project. The developer installs, owns, and operates the PV system, while you earn income from leasing your roof. This option is useful if you do not want to invest in a solar system or use the power yourself, but still want to earn from an unused rooftop.

Which is the Right Model for Your Home?

The right Soura model between CAPEX and OPEX/RESCO or leasing depends on whether you want to own the system, avoid the upfront cost, or earn from your roof.

• Choose the CAPEX model if you can pay for the system and want the highest long-term savings. Since you own the system, most of the financial benefit stays with you.
• Choose the RESCO model if you want solar power but do not want to spend a large amount upfront. The developer owns and maintains the system during the PPA tenure, while you pay for the electricity it generates.
• Choose the third-party leasing model if you do not want to use the solar power yourself and mainly want rental income from your roof. In this case, your roof becomes an earning asset for the developer’s solar project.

Eligibility for the Soura Rooftop Solar Scheme

Eligibility for the Soura rooftop solar scheme depends on your KSEB connection and your claim to the property. You can apply under this scheme if:

• You have an active KSEB domestic connection in your name.
• You have not previously claimed a central rooftop subsidy on the same property for systems of 3 kW or more.
• You are an Indian citizen installing made-in-India, ALMM-approved solar panels.

Roof, Ownership, and KSEB Connection Requirements

Before your rooftop solar system is approved, KSEB will confirm that your roof, electricity connection, and consumer details are suitable for installation.

• Your roof should have enough shade-free space: For a 3 kW rooftop solar system, you’ll need ~250 to 300 sq. ft. of shadow-free roof area. The space should not be shaded by trees, nearby buildings, water tanks, or other structures.
• You need a valid KSEB consumer number: The solar system should be linked to your electricity connection, so your KSEB consumer number is required during the application and net metering process.
• The applicant should have rights over the roof: Since the system is installed on the property, the applicant should either own the house or have permission to use the roof for solar installation.

Capacity Limits Under the KSERC Net Metering Regulations in Kerala

KSERC (Kerala State Electricity Regulatory Commission) limits the size of rooftop solar systems based on the consumer category. For some larger systems, the regulations also require battery storage. The storage requirement is calculated as a percentage of the system’s generation potential.

• Domestic consumers: Homes can install rooftop solar systems up to 20 kW. Battery storage is required only for larger systems (10% storage for systems above 10 kW and up to 15 kW, and 20% storage for systems above 15 kW and up to 20 kW). From April 1, 2027, systems between 5 kW and 10 kW will also need 10% storage.
• Industrial consumers: They can install industrial solar systems up to 500 kW. Battery storage is required for higher-capacity systems (10% storage for systems above 25 kW and up to 100 kW, and 20% storage for systems above 100 kW and up to 500 kW).
• Apartments, colonies, and common-area connections: Common-area connections can also install systems up to 500 kW, but the system size must not exceed the connected load or contract demand. The same storage rule applies. 10% storage above 25 kW and up to 100 kW, and 20% storage above 100 kW and up to 500 kW.

What are the Documents Needed to Apply for the Soura Rooftop Solar Scheme?

Here are the core documents you will need to apply for the Soura rooftop solar scheme in Kerala:

• Identity proof
• Proof of property ownership
• Latest KSEB bill with consumer number
• Bank account details for the subsidy
• Rooftop photographs

Once these documents are ready, you can begin the application process, explained below.

How to Apply for the Soura Rooftop Solar Scheme?

You can simply follow the steps listed below to apply for the Soura rooftop solar scheme in Kerala in 2026:

• Step 1: Register on the rooftop solar/discom portal: Sign up with your mobile number and KSEB consumer number, choose Kerala and KSEB as your discom, and submit the application.
• Step 2: Get technical feasibility approval from KSEB: KSEB checks if the connection and local network can take the system. Feasibility approval comes before installation.
• Step 3: Select an empanelled developer: The solar vendor must be on the approved list of empanelled developers on the KSEB or PM Surya Ghar National Portal. Using a non-listed vendor disqualifies you from subsidy eligibility.
• Step 4: Installation and inspection: The developer installs the solar system. KSEB inspects before the system becomes live and starts generating power.
• Step 5: Net meter installation and commissioning: A net meter replaces the old meter. You have to sign the net meter agreement with the DISCOM. Commissioning makes the system live and grid-connected.
• Step 6: Subsidy disbursal and timelines: This is only relevant to homes and housing societies, as commercial users do not receive a subsidy. You can register on the PM Surya Ghar Muft Bijli Yojana National Portal to claim your subsidy.

Net Metering and Billing Under the Soura Rooftop Solar Scheme

Solar net metering is the billing system that converts your rooftop solar generation into savings. It tracks how much solar power your home uses directly, how much extra power you send to the KSEB grid, and how that exported power is adjusted against your bill.

How Does Net Metering Work?

Here’s the full flow for net metering in Kerala:

1. Solar power is used by your home: If your rooftop PV system is generating electricity while your appliances are running, that solar power is used directly, reducing the units you buy from KSEB.
2. Extra solar power is exported to the grid: If the system produces more electricity than your home needs at that moment, the extra units are sent to the KSEB grid.
3. Exported units are adjusted against imported units: KSEB first adjusts the exported solar units against the electricity you import during the same billing cycle.
4. Unused surplus is banked for later use: If any exported units remain after adjustment, they are banked. These banked units can be used to offset your future electricity imports.
5. Banked units are used in a set order: When you use banked energy later, it is first adjusted against solar-hour imports, then off-peak imports, and then peak-hour imports.
6. Some surplus can be used to cover fixed charges: If surplus units are still available at the end of the billing period, the units needed to cover fixed charges, meter rent, and similar charges are settled at the applicable APPC or feed-in tariff rate.
7. Year-end surplus is settled separately: At the end of the financial year, any remaining banked energy is paid out by KSEB before 30 April of the following year, unless you choose to carry it forward.

KSERC Settlement: Banking and What KSEB Pays for Surplus?

If KSEB settles your remaining surplus in cash, the rate depends on whether you are an existing or new prosumer (producer and consumer of solar electricity):

• Existing prosumers: ₹ 3.08 per kWh
• New prosumers: ₹ 2.79 per kWh for solar

Net metering necessarily does not mean KSEB pays you the full retail electricity tariff for every extra unit you export. Your biggest savings come from using your own solar power and offsetting exported units against your bill. Cash payout applies only to the surplus remaining after billing and banking adjustments.

Financing and Loan Options for Rooftop Solar

The PM Surya Ghar Muft Bijli Yojana subsidy reduces your final cost, but you usually have to pay for the rooftop solar system first. The subsidy is credited later, after installation and approval. This is where a solar loan can help.

KSEB lists a loan facility on its E-Kiran portal, and several banks run dedicated solar loan products for rooftop systems. This allows you to install the system now, repay the loan in EMIs, and use the subsidy amount to prepay part of the loan once it is credited to your bank account.

Before choosing a loan, compare the interest rate, repayment tenure, processing fee, prepayment rules and total EMI. The best solar loan is the one that keeps your monthly repayment comfortable while still making solar savings worthwhile.

Conclusion

For Kerala homeowners, the Soura rooftop solar scheme makes solar easier to understand and access. The subsidy comes through the PM Surya Ghar Muft Bijli Yojana, while KSEB handles the application, net metering and billing process in the state.

Shree Rudra Power Systems is not operational in Kerala at the moment, but we help homeowners go solar across 29 other Indian cities. If you are planning a rooftop solar installation and want to understand the right system size, subsidy, savings, and installation process for your home, book a free consultation call with Shree Rudra Power Systems.

FAQs

What types of solar systems can be installed under the Soura Rooftop Solar Scheme?

Under the Soura rooftop solar scheme, Kerala homeowners can install grid-connected rooftop solar systems. This includes on-grid systems and, where allowed, hybrid systems with battery backup.

Is there any separate Kerala state subsidy?

No, Kerala does not currently offer a separate state subsidy for residential rooftop solar installation. The subsidy is provided under the central PM Surya Ghar Muft Bijli Yojana. Soura rooftop scheme, on the other hand, is the KSEB route through which the application and subsidy process is handled in Kerala.

Is net metering available in Kerala?

Yes, net metering is available in Kerala under KSERC regulations. It allows your exported solar units to be adjusted against the electricity you import from the KSEB grid, with any remaining surplus banked or settled in accordance with the applicable rules.

Can tenants apply for the Soura rooftop solar scheme?

Yes, but tenants need written permission from the property owner. Since the solar system is installed on the roof and linked to the KSEB electricity connection, owner approval is required.

Where can I find KSEB-approved solar vendors?

You can find approved or empanelled solar vendors on the KSEB portal and the PM Surya Ghar Muft Bijli Yojana National Portal for Rooftop Solar. Before signing with any installer, check that the vendor is listed as approved for rooftop solar work in Kerala.

How long does the KSEB solar application process take from start to finish?

The process usually takes around 30 days, but the exact timeline can vary. Delays may occur if documents are incomplete or feasibility approval takes longer.

The post Soura Rooftop Solar Scheme in Kerala in 2026 appeared first on Rooftop Solar for your home and more | Shree Rudra Power Systems.

• Under the PM Surya Ghar Muft Bijli Yojana, households can receive ₹ 30,000 per kW for the first 2 kW and another ₹ 18,000 for the third kW.
• The maximum subsidy is capped at ₹ 78,000 for systems of 3 kW or higher.

Homeowners in Bihar can get a subsidy only under this scheme. It is the only active solar subsidy scheme, and there’s no specific state-level solar panel subsidy in Bihar for general households.

This blog breaks down the process to apply for a solar panel subsidy in Bihar, the exact financial assistance you can get (and under what eligibility conditions) under the PM Surya Ghar Muft Bijli Yojana in Bihar, the mistakes that can delay the subsidy or make you ineligible for it, and the benefits of solar energy subsidy in Bihar.

Understanding Bihar’s Solar Ecosystem: Key Institutions

Before applying for rooftop solar in Bihar, you should know about the three bodies involved in the process, as each has a different role.

• BREDA (Bihar Renewable Energy Development Agency): BREDA is the state nodal agency for renewable energy in Bihar. It implements solar programs statewide, runs awareness campaigns, and coordinates rooftop solar adoption at the state level.
• NBPDCL (North Bihar Power Distribution Company Limited): NBPDCL is the DISCOM that distributes electricity across 21 districts of North Bihar, including Muzaffarpur, Darbhanga, Sitamarhi, Madhubani, Begusarai, Purnia, and Katihar. If your electricity connection falls in any of these districts, NBPDCL is your distribution company (DISCOM).
• SBPDCL (South Bihar Power Distribution Company Limited): SBPDCL is the DISCOM that distributes electricity across 17 districts of South Bihar, including Patna, Gaya, Bhagalpur, Nalanda, Aurangabad, Munger, and Rohtas.

How Much is the Solar Panel Subsidy in Bihar in 2026?

The PM Surya Ghar Muft Bijli Yojana is the only active solar panel yojana in Bihar for homeowners above the poverty line. This central government scheme caps the maximum subsidy at ₹ 78,000 for systems of 3 kWp or more.

Here’s a tiered breakdown of the central subsidy:

• ₹ 30,000 per kW for the first 2 kW
• ₹ 18,000 for the additional capacity up to 3 kW
• The total subsidy on solar panels in Bihar under the PM Surya Ghar Muft Bijli Yojana is capped at ₹ 78,000 for systems of 3 kW or above.

Here’s a breakdown of the exact amount of solar panel subsidy in Bihar that you can claim based on the size of the solar system that you install:

Is There any Special Bihar Govt Subsidy on Solar Panels?

No, there is no separate Bihar government solar subsidy that adds to the central subsidy offered under the PM Surya Ghar Muft Bijli Yojana for general households. Bihar offers a single subsidy for most consumers, with only one targeted subsidy scheme reserved for below-poverty-line families.

• PM Surya Ghar Muft Bijli Yojana is the only subsidy on solar panels in Bihar for above-poverty-line consumers: If you are a regular domestic consumer, your grant comes entirely from the central government, and is capped at ₹ 78,000.
• Kutir Jyoti Yojana for BPL families only: Kutir Jyoti Yojana is the Bihar govt subsidy on solar panels for below-poverty-line households. The overall target under this scheme is to cover 58.89 lakh BPL homes. In the 1st phase, Bihar targeted 2.5 lakh Kutir Jyoti consumers. The application window for this phase ran from February 28th to March 31st, 2026. Families who missed the 1st phase do not lose eligibility forever. They can apply when the next phase is announced.

Who is Eligible for the Solar Energy Subsidy in Bihar?

Homeowners who meet the following eligibility conditions can claim a solar panel subsidy in Bihar under the PM Surya Ghar Muft Bijli Yojana:

• The solar panels being installed should be made in India and ALMM-approved.
• The solar system being installed should be connected to the grid.
• You must be an Indian citizen with an active electricity bill on your name with your city’s local DISCOM.
• You must be the legal owner of the roof/property where the PV system will be installed.
• You have never received a subsidy for systems up to 3 kW before.

What are the Documents Needed to Apply for a Solar Panel Subsidy in Bihar?

The three core documents you need to apply for a solar panel subsidy in Bihar under the PM Surya Ghar Muft Bijli Yojana include identity proof (Aadhaar or PAN), proof of property ownership (like property papers), and your most recent electricity bill.

How to Apply for a Solar Panel Subsidy in Bihar? Step-by-step

All homeowners eligible for the Bihar solar panel subsidy under the PM Surya Ghar Muft Bijli Yojana need to create an account on the PM Surya Ghar Muft Bijli Yojana National Portal for Rooftop Solar to apply for and receive the subsidy grant directly into their bank accounts.

You can follow these simple steps to apply for the PM Surya Ghar Muft Bijli Yojana solar panel subsidy in Bihar.

• Step 1 – Access the solar portal: Open the PM Surya Ghar Muft Bijli Yojana National Portal for Rooftop Solar and click the rooftop solar application section.
• Step 2 – Register yourself: Select your state, district, and DISCOM from the available dropdowns. Then, use the Customer Account number on your electricity bill to create an account on the portal.
• Step 3 – Fill in your details: Share your name and age, and enter the relevant numbers from your most recent electricity bill.
• Step 4 – Add your banking details: Upload the required supporting documents, provide your bank account information, and attach a copy of a cancelled cheque.
• Step 5 – Finalize an empanelled vendor: Review the list of DISCOM-approved installers on the portal and pick the vendor you want to hire.
• Step 6 – Review, sign, and upload the agreement: Go through the installer agreement, sign it, and upload the signed version to the portal.
• Step 7 – DISCOM installs the net meter: After your solar system is installed, DISCOM installs a bi-directional net meter or smart meter.
• Step 8 – Collect your commissioning certificate: The DISCOM inspects the solar system and then issues the Solar Commissioning Certificate.
• Step 9 – File for the solar panel subsidy in Bihar: Log back into the portal and upload the solar commissioning certificate to file the subsidy claim.
• Step 10 – Subsidy is credited to your account: Once verification is complete, the subsidy is deposited directly into your registered bank account, usually within 30 days.

What are the Benefits of a Subsidy on Solar Panels in Bihar?

The solar subsidy in Bihar directly reduces the cost of installing rooftop solar. For eligible homes, financial assistance can be up to ₹ 78,000 for systems of 3 kW or more.

Let’s look at the advantages of a solar panel subsidy in Bihar in detail.

• Lower installation cost: The subsidy reduces the amount you need to pay out of pocket. This makes rooftop solar easier to afford for most households.
• Faster payback: Since the final installation cost gets lower after the subsidy, electricity bill savings recover the investment sooner.
• Direct payment to your bank account: The subsidy is transferred through Direct Benefit Transfer (DBT) after the system is installed and commissioned.
• Easier financing for the remaining amount: After the subsidy, the remaining balance is smaller. And that, too, can be funded through a PM Surya Ghar solar loan from PSU banks or solar financing schemes by NBFCs.

Common Mistakes that Can Make You Ineligible for the Bihar Government Solar Subsidy

The solar subsidy you are eligible for in Bihar can be delayed or rejected if the basic rules are not followed. Therefore, before applying, check for these common mistakes.

• Choosing an unapproved installer: Only an empanelled solar vendor and ALMM-approved solar panels make you eligible to receive the subsidy. If you choose an unapproved installer or non-approved panels, you lose subsidy eligibility.
• Document name mismatch: The name on your electricity bill, Aadhaar, and bank account should match. If the names differ, verification and subsidy transfer may be delayed.
• Installing a system larger than your sanctioned load: Your solar system size should not exceed the sanctioned load on your electricity connection. If it is oversized, the application may fail the feasibility check. In such cases, you should first file an application with your DISCOM for an increase in the sanctioned load.
• Applying with a commercial connection: The rooftop solar subsidy in Bihar is available only to residential consumers. Commercial and industrial electricity connections are not eligible for the household subsidy.

Conclusion

2026 is the best time to go solar, not just in Bihar but across the country, thanks to the hefty subsidy grant of ₹ 78,000 offered by the central government, making rooftop solar affordable for all. However, this subsidy grant will be offered only until the government solarizes 1 crore homes in the country under this scheme.

Clearly, a subsidy on rooftop solar will not be offered forever. The deadline to achieve this target has been set as March 31, 2027, making now the best time to install solar at cheaper rates.

Although Shree Rudra Power Systems isn’t operational in Bihar, we install rooftop solar across 29 cities in India. If you’re looking forward to installing rooftop solar that can last for 25 years, remain unphased even when winds touch 170 km/hr, and offers a generation guarantee with a money-back promise, it’s time to book a free solar consultation call with Shree Rudra Power Systems.

FAQs

What is the subsidy for a 3 kW solar panel in Bihar?

Eligible homeowners can claim a subsidy of ₹ 78,000 for installing a 3 kW grid-tied solar system in Bihar.

Who manages rooftop solar applications in Bihar?

Three bodies handle different parts of the process.

• NBPDCL for North Bihar consumers: It serves as the authority for feasibility and net metering approvals for the 21 northern districts in Bihar.
• SBPDCL for South Bihar consumers: It plays the same role as NBPDCL for the 17 southern districts, including Patna.
• MNRE and the PM Surya Ghar Muft Bijli Yojana National Portal: These manage the central subsidy itself, from application to the final DBT credit.

Can tenants apply for a solar panel subsidy in Bihar?

Yes, tenants can apply, but they need a No Objection Certificate (NOC) from the property owner. The subsidy is credited to the person whose name is registered on the electricity connection, so the application and the connection details must align.

Can BPL families apply for a solar panel subsidy in Bihar?

Yes, below poverty line families are served through the Bihar government’s Kutir Jyoti Yojana. Under the 2026 Kutir Jyoti program, the state is installing rooftop solar on lakhs of BPL households, free of cost.

What does 300 units of free electricity under PM Surya Ghar mean?

Against the common notion that the government offers 300 free electricity units, it means a correctly sized rooftop system, usually around 3 kW, generates ~300 units of electricity each month, which is close to what an average household consumes.

• You use your own generation throughout the day.
• Net metering credits the surplus you export against the units you draw at night.

The word free refers to this exact offset through self-generation. As a result, your bill drops to a small fixed charge or nearly zero. It is not a cash payment or a waiver from your DISCOM.

How long does it take to get a solar panel subsidy in Bihar?

The subsidy is paid within 30 days of your system being commissioned. Commissioning happens after installation, the net meter setup, and the DISCOM inspection. So, the 30-day clock starts once your system is officially live.

Is rooftop solar free in Bihar?

This applies only to BPL families applying for solar through the Kutir Jyoti Yojana. Under this scheme, a rooftop solar system of 1.1 kW is installed on the roof of the BPL household completely free of cost.

For general households, this is not true. A solar panel subsidy in Bihar under the PM Surya Ghar Mift Bijli Yojana can reduce the installation cost by up to ₹ 78,000 for systems with a capacity of 3 kW or higher. But rooftop solar installation is not free.

Can commercial users get a solar subsidy in Bihar?

No, they can’t. The PM Surya Ghar Muft Bijli Yojana offers a subsidy only to residential consumers, including homes and housing societies. There is no such financial assistance for commercial solar users. What commercial and industrial solar consumers get from rooftop solar is lower bills and accelerated depreciation for tax purposes.

Is there a solar subsidy for farmers in Bihar separate from PM Surya Ghar?

Yes, farmers have a separate scheme called PM-KUSUM Yojana, which supports solar water pumps and small solar plants for agricultural use. PM Surya Ghar Muft Bijli Yojana covers household rooftops, while PM-KUSUM Yojana is designed for farm energy needs.

The post Solar Panel Subsidy in Bihar in 2026: How to Apply, Eligibility, and Total Grant appeared first on Rooftop Solar for your home and more | Shree Rudra Power Systems.